Need a barrel turned and tapped.

[bruiser09]

I have a Quarter Circle 10, 9mm barrel, about 5.5" long, that I want turned and tapped .578x28.
I'm aware that isn't a conventional tap for 9mm but it is for 45ACP and I want to use the same can on two guns.
Assuming there isn't a reason why this can't be done, does anyone have a recommendation for a shop to do this?

Thanks,
-bob

[LawEnforcementSalesTN]

Bob I can help if you don't mind shipping.  I would need to measure the outside diameter (OD) of the barrel. You really need a small shoulder created for the suppressor to butt up against.  The .578 is the diameter portion of the pattern, with 28 threads per inch.  So, I'd say the barrel's OD really needs to be around .750" or so to give it a decent shoulder.

You may be ok would just have to see.. worse case I could machine a shoulder adapter.

But happy to help if you can't find a local resource you trust.

 

Thx

Mike

[deafdogdief]

Bob, I'm using tapatalk and can't see your location. Where are you?


Sent from my iPhone using Tapatalk

[bruiser09]

Bob I can help if you don't mind shipping.  I would need to measure the outside diameter (OD) of the barrel. You really need a small shoulder created for the suppressor to butt up against.  The .578 is the diameter portion of the pattern, with 28 threads per inch.  So, I'd say the barrel's OD really needs to be around .750" or so to give it a decent shoulder.
You may be ok would just have to see.. worse case I could machine a shoulder adapter.
But happy to help if you can't find a local resource you trust.
 
Thx
Mike

The OD of this barrel is .920.
Also, it is already crowned.
Any idea on price and turn around time?
Thanks, Bob

Sent from my SM-G935V using Tapatalk

[LawEnforcementSalesTN]

Prefect. Is it not threaded now at all? Doesn't matter either way just if it's threaded 1/2x28 or 36 we'd have to cut it back a bit. No difference in price just asking.

Threading would be $65. Shipping I'd expect USPS priority small box would be fine. Right around $7 base+ couple dollars depending on what you were confortable with insurance wise.

Turn around 3-4 days at most.



Sent from my iPhone using Tapatalk

[bruiser09]

Sounds good.

Reply with shipping address and I'll send it out.

-bob

 

[LawEnforcementSalesTN]

Sorry been out of town ... the shop address is

Law Enforcement Sales

5110 Harriman Hwy

Oliver Springs, TN 37840

 

[bruiser09]

Thanks, I'll send it tomorrow.

-bob

[crashgordan]

 Nice.  TGO rocks

[LawEnforcementSalesTN]

20 hours ago, bruiser09 said:

Thanks, I'll send it tomorrow.

-bob

Thank you sir!  I'll let you know when it arrives

[bruiser09]

The barrel was just shipped Friday.

I forgot to include a note.

My address is on the box for return shipping.

I will PM with full details.

-bob