.45 Super data

[Handsome Rob]

Any of you guys running any .45 Super loads in your acps?

I'd be interested in hearing your load data, especially concerning AA2400 & 200/250gn cast loads.

 

I'm on the fence between loadinging some Supers for my XDs (around $50) or just buying a damn 10 mil (around $500)

I've shot buffalo bore & Underwood supers through my XDs with no trouble (other than a re-located elbow) but it's time to reload my own, I think.

[Quavodus]

.45 Super loads have interested me for some time. There's a .45-08 cartridge too. Sorry, I've never loaded anything in that pressure range. There's some loads on www.handloads.com But, nothing with AA2400.

Edited August 25, 2016 by Quavodus

[ohell]

I've never used 2400, h110 and accurate #9 fan for loads in that powder application.  H110 wouldnt run in the small case and doubt 2400 would be ideal.  Tried HS6 and prefer longshot for warm 45acp to 460 rowland range. Plenty of info on Hodgdon's site so not sharing since i am loading in that range. I see a lot of 800x and alliant power pistol loads on other boards.

I saw a few of your other posts. My o2. i've ditched a few 10mm's to play in the 45 acp loadings. Bullet selection is easier to find. Heavy hard cast .40 caliber bullets expensive and harder to find; if you shoot a lot.  10mm with option of 9x25 dillon would be the only reason i would avoid 45 auto load options if i could only have one. Stay locked up through powder burn and play it safe until you find what your pistol of choice prefers.