Jump to content

Anyone with a Glock 20 40 SW Conversion setup out there...?


leroy

Recommended Posts

Posted

Dear brother and sister TGO'ers...

Am thinkin about investing in a Lonewolf (..or other...) Glock 20 conversion barrel in 40SW... Anyone usin them...?  Do ya like 'em...?   What are the other conversion barrel vendors ya like...?

Thanks in advance...

leroy

 

 

Posted
36 minutes ago, KahrMan said:

Why would anyone want to defile their G20 with a .40 conversion...:devil:

Kahr....

Ya make a valid point... The idea is shootin cheap ammo thru this great gizmo at the pistol range; and savin the "real stuff" for the "...i gotta hit it hard..." situations... 40 brass is so cheap ya dont need ta bother to pick it up... Ten mm... Pretty expensive...

 

el cheapo leroy...

Posted

Gotcha.  I never liked shooting my buddies 23.  The recoil was snappy and just did not feel right.  In the full size 20 I am sure it would be fine.  40 is cheaper than 10mm so its might not be a bad idea.  

  • Like 1
Posted

When I had my 20 I planned on getting the 40 barrel too. In a pinch you can shoot the 40 out of the 10 barrel, but it is hard on the extractor and reliability suffers. I ultimately ended up reloading because of the 10mm which wasn't a bad thing.

  • Like 2
  • 1 month later...
Posted
On 7/15/2016 at 9:33 AM, Patton said:

When I had my 20 I planned on getting the 40 barrel too. In a pinch you can shoot the 40 out of the 10 barrel, but it is hard on the extractor and reliability suffers. I ultimately ended up reloading because of the 10mm which wasn't a bad thing.

I have never tried this, but THIS GUY (again, I have never tried it) claims that it is actually better to shoot .40 out of a Glock 20
http://www.thetruthaboutguns.com/2015/06/jeremy-s/40-in-a-10mm-glock/

 

Posted

My 29 would run .40 with the stock barrel. I only ran a few mags to see "what if". I've also read of people loading .40 brass to 10mm OAL with 10 loads. In both cases the round is headspacing off the extractor. 

Posted

All...

I invested in a "Lone Wolf" 40 barrel... It works like a charm.... The 20 shoots soft with the 165 grain 40SW ammo... Is a joy to shoot... Don't even bother to pick up the brass... Highly recommended...

el cheapo leroy

Posted
2 hours ago, ohell said:

gen 3 or 4 and what recoil spring are you using?

Gen 4... Stock recoil spring...  Works like a charm...

leroy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.