New AR trigger

[Johnny Rotten]

Curious, since anyone can go onto YouTube and see countless videos of the braces being used in this manner. Has the ATF gone after anyone yet for this?

 

YT is full of illegal FA videos as well, never heard them bringing charges on anyone yet..

[JohnC]

That gun he is using isn't working too well with the trigger setup. I have, however, seen another video where that trigger ran like a MG with no failures.

That made me wonder if it had something to do with his upper gas and buffer tuning.

At any rate, with a functionally flawless AR15 and some better trigger timing, I bet it will fire flawlessly like a FA.

I actually want to buy one and try it out.

I have a Tac-Con 3MR and it is fast.

A Tac-Con 3MR with a Slidefire is way too easy to empty a mag in seconds.

Watch this guy. I counted just under 3 secs to dump 30rds:

https://www.youtube.com/watch?v=F1a0HWKWxF8

That's the speed I experienced with the same setup. I've not had one single failure either. Edited January 12, 2016 by JohnC

[Johnny Rotten]

That gun he is using isn't working too well with the trigger setup. I have, however, seen another video where that trigger ran like a MG with no failures.

That made me wonder if it had something to do with his upper gas and buffer tuning.

At any rate, with a functionally flawless AR15 and some better trigger timing, I bet it will fire flawlessly like a FA.

I actually want to buy one and try it out.

I have a Tac-Con 3MR and it is fast.

A Tac-Con 3MR with a Slidefire is way too easy to empty a mag in seconds.

Watch this guy. I counted just under 3 secs to dump 30rds:

https://www.youtube.com/watch?v=F1a0HWKWxF8

That's the speed I experienced with the same setup. I've not had one single failure either.

 

my first choice would be an adjustable gas block that would slow it way down, then follow it up with a buffer if that didn't work

[mikegideon]

That gun he is using isn't working too well with the trigger setup. I have, however, seen another video where that trigger ran like a MG with no failures.

That made me wonder if it had something to do with his upper gas and buffer tuning.

At any rate, with a functionally flawless AR15 and some better trigger timing, I bet it will fire flawlessly like a FA.

I actually want to buy one and try it out.

I have a Tac-Con 3MR and it is fast.

A Tac-Con 3MR with a Slidefire is way too easy to empty a mag in seconds.

Watch this guy. I counted just under 3 secs to dump 30rds:

https://www.youtube.com/watch?v=F1a0HWKWxF8

That's the speed I experienced with the same setup. I've not had one single failure either.

 

You can tune it, but I think hammer follow is just gonna happen. Bolt bounce isn't the cause. That's what you are fixing when you tune buffer weight.