AK47 WOOD STOCK RECOIL PAD

[lshel]

I have a Wasr10 and a C39, both have the shorter wooden stocks, approximately 9.5" from receiver back.

I would like to add a rubber recoil pad to the stock butt to add an additional 1" to the length. I've found two on the net that are advertised to fit most AK47 stocks: UTG AK47 Combat Butt Pad and a butt pad by COI. Both add 1.0" to stock length. 

 

Those that have added a recoil pad for extra pull length, what have you installed???

[Garufa]

Both.  I actually prefer the UTG as it has more surface area but it has a tendency to come off.  The solid, screw-on is fine as well but don't torque down the screws to hard.  They are kind of cheap and there is nothing but a small washer for the screw head to seat on with only rubber underneath.

[Oh Shoot]

Note that this style with the two screws will not fit the current crop of WASRs, now that they have changed to the solid wood stock they also changed the screw locations.

 

 

 

 

 

I use this style on my WASRs, and use a strip of double sided outdoor tape inside. Mine are both UTG brand.

 

 

- OS

Edited October 6, 2015 by Oh Shoot