Off-Road Suspension Install- Toyota FJ

[Lumber_Jack]

So I have a 2014 FJ Cruiser that I am going to put some coilovers, upper control arms, rear shocks and rear springs.  Does anyone know a good shop in the nashville area that you recommend.  TGO David already recommended Essentially OffRoad in Murfreesboro, but its a little difficult to get that far out on a weekday.  The install is not difficult, its just time consuming, probably 6-7hrs.  Any ideas is much appreciated.  Also, I do have an offer from a guy in Mount Juliet to help me install, I just like quick and simple, but I'm not against doing it myself, I just lack a good place to do it.  

 

 

[URL=http://s680.photobucket.com/user/owensnj/media/we25nonresi_zpsgiqmqcwi.jpg.html][/URL]

Edited September 14, 2015 by Lumber_Jack

[nightrunner]

I'll second Essentially Offroad. I've had a few buddies have lifts or leveling kits installed there always top end work. They have some pretty awesome rigs theirselves.

[2.ooohhh]

Happy to help you do it if you want to DIY, I have a lift/shop/tools. Shoot me a PM if interested, shop is located in Brentwood.

[Reservoir Dog]

You might look at 4 Wheel Parts.  They just a bit up the road from you at Nolensville Pike & Harding Place (next to Arby's).

 

I have no experience with them and do not know of their work quality, so you should do your research.

[Caster]

When you're done, you can come do mine!

[Lumber_Jack]

Happy to help you do it if you want to DIY, I have a lift/shop/tools. Shoot me a PM if interested, shop is located in Brentwood.

Wow, man that is a generous offer. I'll send you a message.

[bud]

. Edited December 1, 2015 by bud

[Lumber_Jack]

You might look at 4 Wheel Parts.  They just a bit up the road from you at Nolensville Pike & Harding Place (next to Arby's).

 

I have no experience with them and do not know of their work quality, so you should do your research.

 

I have no personal experience but I've been told to steer clear of there by people who have.  

[KahrMan]

Happy to help you do it if you want to DIY, I have a lift/shop/tools. Shoot me a PM if interested, shop is located in Brentwood.

 

 

Wow, man that is a generous offer. I'll send you a message.

 

Just be careful not to bump into any of the nice cars there...

[SupaRice]

Avoid 4Wheel Parts at all costs.....

 

EoR does good work, and if Jimmy doesn't have anything going on he MIGHT get you done a day or two later than what he says.... But typically he's got a bunch of stuff in there.

 

Honestly, for something that simple. Gateway tire in Cool Springs is a good choice. They're reasonable, and know how to do it. They do that stuff all the time, I had them do the same thing to the wife's 4Runner and it was <$200 and done in a day.

 

It's not that bad of a job if you have a lift and the tools, I had Gateway do the wife's truck because I'm lazy don't have a lot of time these days.

 

:2cents:

Edited September 15, 2015 by SupaRice

[Lumber_Jack]

Thanks for that. I had no idea about Gateway.