Knoxville gunsmith help

[duncan1371]

I have a Remington field master .22 pump that was my late father's when he was a kid. However the extractor is broken and I can't seem to find anything online in the ways if help for it. It has a lot of sentimental value to me so I am trying to get it back to working condition.

Now for my question does anyone on the fine board know of a place near or around knoxville that can possibly make the part if needed or maybe jas been in business so long might have some old Remington parts hanging around.

Thank yall in advance for your help.

Sent from my SM-N900V using Tapatalk

[Garufa]

Is it a 121 or 572 Fielmaster?  I assume it's a 121 so here is where you can get an extractor:  https://www.gunpartscorp.com/Manufacturers/Remington-33454/Rifles-37895/121-39477.htm

 

Here's a video on removing the bolt:  https://www.youtube.com/watch?v=7nHoDYBzJzY

 

Not entirely sure how the extractor is removed/installed but it can't be all that difficult.  The schematic linked about should help.

[peejman]

If what he said didn't help, the first place I'd call is Predator Custom Shop.  Well... they're the 2nd place I'd call.  I'd probably call Dolomite first. 

[duncan1371]

It is a 572. I should have been more specific. Thank you for the quick response.

Sent from my SM-N900V using Tapatalk

[duncan1371]

I took it to a gun smith while I was working in PA and they couldn't seem to locate a part for it. But it was also a small over worked shop so I don't know if they took the time to really look or had the capacity to make a new one. I have considered talking to Remington directly but I like dealing face to face.

Sent from my SM-N900V using Tapatalk

[Oh Shoot]

I took it to a gun smith while I was working in PA and they couldn't seem to locate a part for it. ..

 

No local shop is even remotely likely to have something like that laying around.

 

572 extractors, spring, and pin:

 

https://www.gunpartscorp.com/Manufacturers/Remington-33454/Rifles-37895/572-39538.htm?page=2

 

- OS

Edited August 12, 2015 by Oh Shoot

[duncan1371]

You are a saint. Thank you very much.

Sent from my SM-N900V using Tapatalk

[Oh Shoot]

You are a saint. Thank you very much.

Sent from my SM-N900V using Tapatalk

 

That doesn't use double extractors does it? Those for separate right/left hand eject models they used to make I guess?

 

- OS

Edited August 12, 2015 by Oh Shoot

[DaveTN]

I would check with Remington; they still make the 572...
https://support.remington.com/BOLT_ACTION_MODEL_770™/060_Getting_Parts_and_Service

[duncan1371]

I am going to take it apart am check out what exactly I need for it I know that the outside extractor is broke. But I'm having trouble seeing anything else that might be wrong.

Sent from my SM-N900V using Tapatalk

[duncan1371]

I would check with Remington; they still make the 572...
https://support.remington.com/BOLT_ACTION_MODEL_770™/060_Getting_Parts_and_Service

I will be getting into contact with them today thank you for the link.

Sent from my SM-N900V using Tapatalk

[viscero]

No local shop is even remotely likely to have something like that laying around.

 

572 extractors, spring, and pin:

 

https://www.gunpartscorp.com/Manufacturers/Remington-33454/Rifles-37895/572-39538.htm?page=2

 

- OS

I was about to say "have you tried Numrich?"  :)