Will this combo work?

[gomer pyle]

this 12.5" barrel(http://ar15performance.com/inc/sdetail/11562/14399) with this 12" DD lite rail III(https://danieldefense.com/rail-systems/ar15-lite-rail-iii/ar15-lite-rail-iiitm-12-0-rifle.html) and a saker 7.62 with trifecta maad module on a muzzle brake(  http://www.silencershop.com/shop/silencerco-saker-762/).

i read somewhere that 1" of barrel needs to be extended past the rail but didn't know if that was right or not. this is the combo i want but will change if i need to.

 

i'm going to get my trust taken care of next week and then on to spending money :rock:

[Capbyrd]

I'm not sure. You need to check the inside diameter of the rail. I imagine that it will be too close, but I'm not familiar enough with that mount.

[Lumber_Jack]

Most people I've seen with the Saker or ACC mounts (both similar) need more than .5" to mount the suppressor. Like Capbyrd said, unless the can will fit under the rail I'd say you need at least a 11" rail

[gomer pyle]

Thanks. I know the can won't fit inside the rail but I didn't know how much barrel I needed sticking out.