Tiny pin cleaning advice.

[Guest princeshoko]

Ok My  G19  I just noticed one of the small pins on the trigger looks like it may have rust on it.  Never noticed before, but im sure it could be anything but its on there good.    I was just going to pop it out to clean it but its not all the way thru and only shows on the one side of the trigger.  Any advice on how to scrape or clean this off without damage?   It may be rust, it may not. 

Photo attached. 

Thanks

Robert

[glock55]

Don't think I would mess with that trigger safety. I always swap out the trigger bar for smooth faced trigger on all my glocks. If you do take apart let us know how it goes.

[peejman]

Put some masking tape over the pin and adjacent area.

 

Cut a small hole the in the tape to expose the end of the pin.

 

Polish it with a bit of scotch-brite.

 

If the discoloration comes off, wipe it with alcohol and dab the end with some paint or a black sharpie. 

 

If the discoloration does not come off, wipe it with alcohol and dab the end with some paint or a black sharpie.

 

:)

[BrasilNuts]

Don't worry about it.