Approved in 20 days!!!

[Dolomite_supafly]

I submitted a F1 for a SBR on the 7th of August and I got approved today.

 

[R1100R]

Did you do this in a trust?

[Dolomite_supafly]

Yeah, electronically submitted on 7 August and approval today.

 

BTW, John Wells did my trust.

[R1100R]

Thanks, I'm going to give him a call.

[TrickyNicky]

Thanks, I'm going to give him a call.

He's awesome. Did mine too after hearing the rave reviews.

Congrats G, so where's the pics already!?

[Dolomite_supafly]

Pictures are going to have to wait. I am not feeling too hot today. I did get the stock made yesterday though.

[Glock30]

Wow! Congrats Dolo!

[TrickyNicky]

:( sorry to hear that. It will give you something to look forward to tomorrow though.

[Luke E.]

 That's incredible!

[leftyk82]

 

 

BTW, John Wells did my trust.

 

and mine.  met him this morning.  smooth process with all my questions answered.

[maroonandwhite]

and mine.  met him this morning.  smooth process with all my questions answered.

So it's safe to say that John Wells is a man you can......"trust"?.................I had to. :rolleyes:

[Dolomite_supafly]

What it will look like as soon as I get to feeling better.

 

[R1100R]

Where did you get the Krink Brake at Gordon?.

 

BTW hope you get to feeling better

Edited August 27, 2014 by R1100R

[Fourtyfive]

Wow that's fast ! Congrats !

[Dolomite_supafly]

Where did you get the Krink Brake at Gordon?.

 

BTW hope you get to feeling better

Do you need it for a US parts count?

 

If not I will sell you mine for $20 shipped. I have to buy a US made one for my conversion.

[R1100R]

Do you need it for a US parts count?

 

If not I will sell you mine for $20 shipped. I have to buy a US made one for my conversion.

 

I have met the count for conversion when mine was made. I will take you up on it if it comes with the detent and spring. Just PM me.

 

Is yours for a 7.62x39???

Edited August 28, 2014 by R1100R

[Dolomite_supafly]

It will not come with the detent and spring.

 

The brake is for a 7.62 even though my gun is not.

[reed1285]

so what exactly needs to be done to the back end of one of these pistol to accept a stock? Do you need to drill holes, etc?

 

Also, I'm guessing the engraving rule applies to these as well? Where do people normally do the engraving on an ak receiver? 

Edited August 28, 2014 by reed1285

[Dolomite_supafly]

It depends on what kind of stock you plan on using. With the ACE folder I added I had to drill two holes and I had to make an angled spacer to bring the rear of the stock up some. Then it is just a matter of bolting everything together. I think pretty much any way you are going to go will require two holes to be drilled. I have seen pictures of people welding a castle nut to the back then install a standard AR buffer tube gut that will not work for a folder. They do make cheap folder mechanisms that use a buffer tube but they are not very durable.

 

The best way, although a bit heavy, is to use a ACE or Stormwerkz folding mechanism and a Manticore stock. The package will run you about $175 shipped. It is about as easy as it gets as far as making an SBR out of these M85/M92 pistols.

 

I found a polymer stock that looks like a Krinkov stock so I chopped off the part that normally goes into the receiver of a rifle. Then I drilled and installed some threaded inserts and then I attached it to the ACE folder. It saved me at least 2 pounds but it is hardly plug and play like the setup above.

 

As far as engraving I will have mine done in about any open space. The guy that does mine does it while I wait and charges $25. His setup takes about 5 seconds to do the engraving and the AR lower I did is about .010" deep which is over 3x the requirement. My Ti tube he engraved is about .006" deep which is twice as deep as it needs to be. In the steel of the AK receiver it should be somewhere in between these two. If he can I will probably have it done on the underside in front of the magwell or on the left side of the receiver because there is a lot of open real estate.

[samson7x]

Boom!!

 

Got mine back in 19 days...incredible.

[Dolomite_supafly]

I am going to go broke turning everything I own into an NFA item.

[samson7x]

I am going to go broke turning everything I own into an NFA item.

 

 

I'm right there with you.  I'm looking at more lowers just to Form1 them. 

[Dolomite_supafly]

My Saiga 12 I can't seem to sell/trade would look really cool with a 12" barrel. As would my Savage bolt gun. Heck I might have to find a R700 to build a SSSR (Super Short Sniper Rifle) :)

[samson7x]

My Saiga 12 I can't seem to sell/trade would look really cool with a 12" barrel. As would my Savage bolt gun. Heck I might have to find a R700 to build a SSSR (Super Short Sniper Rifle) :)

 

I like your style sir!