Adjustable gas block

[orientalexpress]

Who makes the best adjustable gas block?

[Dolomite_supafly]

The best or the best for the money?

[Johnny Rotten]

I've been thinking of buying this one

http://www.syracordnance.com/products/gen-ii-750-adjustable-low-pro-solid-gas-block

anyone else have one??

[orientalexpress]

The best or the best for the money?

Best in general. Ease of use. Not going to lose the set screw easily.

I'm building an ultralight ar with a mag tactical upper and lower. Pencil barrel, low mass carrier, 10" bcm hg and I think an adjustable gas block will be needed.

The guy from the military arms channel stopped by and had a mag tactical he was evaluating that weighed 4.7lbs. I think I can build one lighter, especially since the bcm kmr is made out of the same material as the mag tactical lowers.

[Lumber_Jack]

This [url="http://slrrifleworks.com/index.php?route=product/manufacturer/info&manufacturer_id=13"]http://slrrifleworks.com/index.php?route=product/manufacturer/info&manufacturer_id=13[/url] SLR DA6, DA7, DA8, DA9 The last number is seat diameter. Standard .750 uses a DA7. Comes in clamp on or set screw. The adjustment screw is click adjustable. No loctite, no losing set screw. Drawback...it's $100 Edited March 17, 2014 by Lumber_Jack

[Lumber_Jack]

http://youtu.be/saGc7bPx1pw

[orientalexpress]

This

http://slrrifleworks.com/index.php?route=product/manufacturer/info&manufacturer_id=13

SLR DA6, DA7, DA8, DA9

The last number is seat diameter. Standard .750 uses a DA7. Comes in clamp on or set screw.

The adjustment screw is click adjustable. No loctite, no losing set screw.

Drawback...it's $100

Does it come in .625?

[orientalexpress]

Nevernind I clicked on the link

[Lumber_Jack]

[quote name="orientalexpress" post="1125999" timestamp="1395096040"]Does it come in .625?[/quote] Yep DA6

[Monkeyman2500]

Thank you Lumberjack! That just got bookmarked.

[cch2a]

I bought the Syrac Gen II but have not installed it yet. Fit and finish seems good and clicks are positive. I need a couple more so may check out the SLR one linked above.

[Dustbuster]

+1 on the syrac, am using JP and another that dolomite put me on to, I just finished an ultralight AR w a clark handguard, and ace stock, mine was at 6.4 lbs.w a full lancer lower and sport upper w no fwd assist,used the JP low mass line w JP bolt on the lower, i love it! the lancer magwell isnt attached in this photo,and i changed to the 2 piece nikon mounts for the scope.

 

heres a pic:

https://www.dropbox.com/sc/lpr21a6nsrlgrn7/F60PyHH4GR

Edited March 24, 2014 by Dustbuster

[cgpeanut]

Currently running the seekins precision adjustable gas block on my 300 blk like it so far cheaper @ 57.00 + shipping and its well built. Sent from my Nexus 7

[Lumber_Jack]

[quote name="cgpeanut" post="1129537" timestamp="1395718071"]Currently running the seekins precision adjustable gas block on my 300 blk like it so far cheaper @ 57.00 + shipping and its well built.Sent from my Nexus 7[/quote] I had this one until the brass screw theta holds the adjustment screw in place stripped out. I sent the block back to Seekins and I recieved a shipping notice this week so I assume it's on it's return trip. I'm not really sure why the screw seized up and stripped though. Otherwise the block was great

[Dustbuster]

Bte makes the nice low profile adjustable gas block for under 65.00 Edited March 29, 2014 by Dustbuster