My TGO 300 Blackout AR Pistol Build

[Dolomite_supafly]

Not yet. I'm already in the dog house, due to what I've spent so far.

Can't get much cheaper than this. It is a work of art.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181243919159#ht_509wt_1164

[Lumber_Jack]

Can't get much cheaper than this. It is a work of art.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181243919159#ht_509wt_1164

I wonder if the set screw will need loctite to stay put?

[GuitaRx]

Not yet. I'm already in the dog house, due to what I've spent so far.

 

that's why I keep all my spending secret! :devil:

[Guest sL1k]

I got an order in from JoeBob last week, think I'm off to a good start.

Word of warning the magpul asap sling attachment would not fit on my cmt billet lower. I ended up throwing it on my nfa pistol lower.

[KKing]

Word of warning the magpul asap sling attachment would not fit on my cmt billet lower. I ended up throwing it on my nfa pistol lower.

Really? That's odd, what was wrong? I know mine annoyed the crap out of me until I cut the sling attachment loop off. It sounded like I was walking around with a pocket full of change

[Guest sL1k]

Really? That's odd, what was wrong? I know mine annoyed the crap out of me until I cut the sling attachment loop off. It sounded like I was walking around with a pocket full of change

It has 2 triangle points/teeth that go are supposed to stabilize against the back strap of the lower. Well the cmt is wider there and it wouldn't work. I guess you could Dremel them off.

[TripleDigitRide]

I hope my Noveske QD end plate fits properly.

[KKing]

It has 2 triangle points/teeth that go are supposed to stabilize against the back strap of the lower. Well the cmt is wider there and it wouldn't work. I guess you could Dremel them off.

Got ya, didn't think a thing about these lowers being thicker

[Guest sL1k]

I hope my Noveske QD end plate fits properly.

It should since it doesn't have the "teeth"

[TripleDigitRide]

The new KX3 came in today. Similar to the first one, this one also had the rub marks around it. This one wasn't nearly as bad, so I was able to rub them out with my hands.

 

Edited October 31, 2013 by TripleDigitRide

[Dolomite_supafly]

I wonder if the set screw will need loctite to stay put?

 Yeah it would need to be loctited in place or another setscrew to lock it in place.

Edited November 1, 2013 by Dolomite_supafly

[JeffL]

It has 2 triangle points/teeth that go are supposed to stabilize against the back strap of the lower. Well the cmt is wider there and it wouldn't work. I guess you could Dremel them off.

 

Thanks for the info. I'll pop it on another lower I guess.

[TripleDigitRide]

Engraved ejection port / dust cover. Inside and out.

 

[Rightwinger]

Got mine as well Paul.  Plus some of the new take down and pivot pins.  Laser Edge on ebay.  Good stuff.

 

[TripleDigitRide]

Got mine as well Paul.  Plus some of the new take down and pivot pins.  Laser Edge on ebay.  Good stuff.

 

I've been eyeing those pins, or some very similar.

[Guest sL1k]

I've been eyeing those pins, or some very similar.

Easy take down pins are great. Im including them on all my future builds. I picked up the yhm easy take down pins from joebobs. They have them on sale for 17.95 right now.

[TripleDigitRide]

Was finally delivered.

[Dustbuster]

I wonder if the set screw will need loctite to stay put?

Hey Jack,I've got one on a current build. Yes Loctite needed,the set screw is stainless, blue will work.


Sent from my iPhone using Tapatalk 2 of course it ate my spelling.

[TripleDigitRide]

[Lumber_Jack]

Nice. That BCG will look bad ass in those receivers. What brand is the BCG?

[TripleDigitRide]

Nice. That BCG will look bad ass in those receivers. What brand is the BCG?

http://www.aimsurplus.com/product.aspx?item=XAIMNiBBCGV2&name=AIM+NiB+.223%2f5.56+AR%2fM16+Bolt+Carrier+Group&search=boron

[Guest 6.8 AR]

Off to a good start!

 

I think I will make another AR pistol, and I'm gonna name it "Heinz 57".

[Dustbuster]

got my 2 today viva los pistoleros !!!!!!

[Luke E.]

Can't get much cheaper than this. It is a work of art.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=181243919159#ht_509wt_1164

 

 Hover over the gas tube roll pin and look at the machining. Not going to effect anything obviously, just thought it odd that they didn't clean up the one used for the photo shoot.

[Dolomite_supafly]

I will take a hole that is not cleaned up to save $40. Mine that I actually received is a work of art.