Jump to content

difference between a knife and a sword ?


Guest tangojuliet

Recommended Posts

Guest tangojuliet
Posted

i was wondering  at what length does a knife become a sword  and what is truely the difference between them 

Guest Broomhead
Posted

I am certainly not an expert, but I don't think there is any set minimum length for a sword, or maximum length for a knife. It all depends on what the maker/user decides to call it/refer to it as really. Obviously you wouldn't have a sword with a 2" blade, nor a knife with a 24" blade, but there are short swords and long knives that tend to have relatively the same lengths. The intended use and blade style would also play a role in determining how it is viewed/named. An Asian style tanto knife looks identical to its big brother the katana, except for the dimensions.

 

The differences between swords and knives are fairly few. There are the obvious overall dimensions, the intended use, the blade style, the handle style and relative size, guard and pommel shapes and sizes, and the weight. A short sword could really be considered a long knife, and vice versa. Broad swords, or European swords, have a large weighted pommel to offset the weight of the blade and help balance the sword, a knife wouldn't really need that type of pommel.  Almost all swords have longer handles, relative to the blade, than knives just because two hands are generally used to wield a sword.

 

To add to the confusion, there are also machetes and daggers that can fit into either category.

Posted

What's the diff 'tween a pistol and a rifle according to federal law? (not the barrel length or overall length)

 

When does a hatchet become an ax?

 

Does a rose by any other name smell as sweet? :)

 

- OS

  • Like 1
Posted

Knife is folded to be put into a pocket.

Dagger is a short Sword.

Sword is a long Dagger.

There, I hope that helps. :wave: :yum: :cool: :popcorn:

Posted

it varies by culture and era of the weaponry.   There are a variety of short swords and long daggers that overlap in length.  Typically a short sword is about 2 feet, a dagger 1 to 2 feet, a sword 2-3 and up to over 5 for a few 2 handed.

Posted (edited)
I think it really comes down to common sense in most cases. I doubt, "oh that's my 2ft knife." Would go over well. If you have to ask yourself if it would be considered a sword, its probably a sword..... Lol Edited by bigbabysweets
Posted

I think it really comes down to common sense in most cases. I doubt, "oh that's my 2ft knife." Would go over well. If you have to ask yourself if it would be considered a sword, its probably a sword..... Lol

 

Well, it doesn't matter under TN law, if that's what you mean, anything with a  blade is a "knife", and it can't be over 4 inches.

 

- OS

Posted
Yeah, usually it comes down to those in charge. I was told to leave Walmart once for wearing a 4" knife on my hip because I looked "scary." I had people tell me that Walmarts in FL see alligator hunters with machetes on their sides. It seems it comes down to how it, or you, make people feel.

Maybe it's just the styling technically. I mean I've seen machetes that were about 2ft, but its that a Gladius' length as well?
Posted
To me it has less to do with length, than with style and intent. I built 2 13" blades from the same bar of 1084. One is a bowie knife, with a cross guard and sharpened back clip like a traditonal bowie. So I call it a knife. The other has a tip and curve like a small katana (I blank on the correct term) but I refer to it as a bush sword due to intent and blade style. Its mostly semantics, interpration and intention of the blade from what I can find. There is no set defintion

Sent from the backwoods of Nowhere
  • Like 1
Posted

IMO.

 

Well, . . . a Bowie Knife has a blade of at least 8 inches (20 cm) in length, some reaching 12 inches (30 cm) or more. . . .

 

http://en.wikipedia.org/wiki/Bowie_knife

 

 

And, a Roman Short Sword (Gladius) had several versions to include the Pompeii version, . . . which is the shortest of the gladii.  Blade length ~45–50 cm (17.7 to 19.7 inches).

 

http://en.wikipedia.org/wiki/Gladius

 

 

So, that kind of narrows it down a little.

 

 

If it's under 12 inches, probably a knife.

 

Longer than 17 inches, probably a sword.

 

If it's 13 inches to 16 inches, it would depend, but we're talking only a 3 inch spread here. Call the dividing line 14.5 inches or so and we're done.

 

IMO.

Posted (edited)

Wakizashi is the short sword "katana"

 

The curve is very slight and the tip is squared off etc just like its more well known big brother. 

 

Go smaller and it becomes the tanto knife.

Edited by Jonnin
Posted
Wakizashi is the short sword "katana"
 
The curve is very slight and the tip is squared off etc just like its more well known big brother. 
 
Go smaller and it becomes the tanto knife.


That was what I was trying to think of and drawing a blank. Thanks man

Sent from the backwoods of Nowhere
Posted (edited)

Nathan Bedford Forest told his men to send their swords home to hang on the mantle piece where they belonged.  Although he carried a sword he capture from a Yankee. He said they were next to useless in combat and just got in the way when not in use. He preferred a brace of revolvers.  

Edited by Will Carry
Posted

It depends on the culture. An Asian would most likely consider a blade longer than a foot to be a sword... somebody from Ireland would consider a blade shorter than three feet to be a toothpick...

 

Well, think of it this way, guys. From a government standpoint, they don't care if you have a knife, a sword, a pike, a gun, or a club. If you're armed and a citizen, that's a no-no!

Posted (edited)

I agree with Spots.  I think it really depends on the intended use.  A sword is a weapon that is used by slashing and stabbing with much of the weight concentrated towards the blade end.  A knife is a utilitarian piece that can also be used as a weapon that tends to be more balanced in the hand.  Then you can get into different distinctions based on unique designs in each.  For example, a dagger or a dirk is a knife with a narrow pointed blade that is primarily made for stabbing, especially between the joints in hard armor.  

Edited by East_TN_Patriot
Posted

Here is my rule.  I consider anything used for defense , under 18" and with a blade thickness of 1/4" or less, a knife.  Anything over 18" and a blade thickness of 1/4" or more, a sword.  Swords were used as weapons and really have no other uses, while a knife can be used as a tool or for combat.  A machete could fall into the sword category, but really for combat it's a bit on the thin side and can be bent or broken very easily, where as a sword, if heat treated properly, will not, break or bend easily.  Now a good sword will flex.  But it will always come back to true, where as a machete might not due to the material and heat treatment.

Posted

is there anyone who could teach me a little tactics and how to use a gladius? I have the Cold Steel and their trainer sword. Just would like to know how to use it if I needed to

Posted
is there anyone who could teach me a little tactics and how to use a gladius? I have the Cold Steel and their trainer sword. Just would like to know how to use it if I needed to


I could teach you basic sword handling and knife fighting, but nothing specefic to the gladius.

Sent from the backwoods of Nowhere

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.