Glock Question

[Guest etnsr9c]

I have a gen 2 glock 19, it needs a new recoil spring. The question is can I put a gen 3 captured style spring assembly in it?

[RED333]

This might help,

as I can not answer your question.

http://glocktalk.com/forums/archive/index.php

http://www.amazon.com/Glock-Stainless-Recoil-Spring-Assembly/dp/B004SIMN96

[smithra89]

I would contact Glock...they might just send you one?

[Guest etnsr9c]

This might help,

as I can not answer your question.

http://glocktalk.com/forums/archive/index.php

http://www.amazon.com/Glock-Stainless-Recoil-Spring-Assembly/dp/B004SIMN96

I would not run that crap from amazon, I only run factory parts in guns that I use for ccw.

[BigK]

Maybe check out Wolff Gunsprings. They aren't captured springs. They sell factory, reduced-power, and extra-power springs. They also have spring and guide rod packages. Edited March 4, 2013 by BigK

[RED333]

I would not run that crap from amazon, I only run factory parts in guns that I use for ccw.

I was not finding you a part, just info.

Good Luck on you hunt.

[bikertrash2001]

I would not run that crap from amazon, I only run factory parts in guns that I use for ccw.

 

That doesn't sounds like a very nice response from someone who offered assistance. 

[RED333]

That doesn't sounds like a very nice response from someone who offered assistance. 

Let go, I did.

[glock55]

If I had a gen 2 glock I'd try to get to glock in Atlanta. You'd come out of there with a like new gun.

[Superman]

I have a gen 2 glock 19, it needs a new recoil spring. The question is can I put a gen 3 captured style spring assembly in it?

Yes gen 2 and 3 19 uses the same replacement captive recoil spring

Edited March 5, 2013 by Superman

[Karnage]

The recoil spring part number that you need is SP02457.  If your trigger bar is black instead of silver your 19 has not ever been upgraded.  Most 2nd gen GLOCKs were subject to a six part upgrade.  See more about it here: http://www.thegunzone.com/glock/upgrade-faq.html#nb0 

 

You might want to consider sending it to GLOCK to have the upgrades performed.  They will also replace all of the parts in the pistol (except frame, slide and barrel of course) and if you send your magazines with it they will also replace those with the latest design.

[Guest etnsr9c]

Thanks for the in Karnage

[TN-popo]

I'm sure he meant to thank you too, Superman, since yours was the first definitive and correct answer to his question.

Not that others didn't also try to help...

 

:whistle:

Edited March 5, 2013 by TN-popo