Remington 700 Action / Trigger Guard Screws

[Whistle4Fly]

I purchased a Bell and Carlson Medalist for my Rem700 BDL .300. The factory screws are a bit to short to attach. From researching it online I believe they are 1/4"x28 threads. 1 1/8" and 1 1/2". Does anyone know of somewhere around Knoxville to pick up some maybe .250" longer with the same hex head? Brownells has some replacements with slotted heads. 

[Static_USMC]

Call Maryville fastener, I have gotten some hard to find things there. I am pretty sure they would have the hex heads you are looking for.

 

Maryville Fastener & Hardware

1812 E Broadway Ave Maryville, TN 37804

(865) 977-1141

 

Edited February 3, 2013 by Static_USMC

[Johnny Rotten]

Try lowes, in my area they got a good selection of several speciality fasteners Edited February 3, 2013 by Johnny Rotten

[glock55]

I just did a adl to bdl conversion using bell and Carlson stock. You can call bell and Carlson they will send you the longer front screw for free or go to brownells look at part#084-727-701wb. These screws were one and half threads too long so ran nut on screw filed to length and removed nut to clean threads. Torqued to 65 inch pounds and worked perfectly.

[alwaysonjohn]

i would just call bell and carlson and they will send it to you for free since it should have came with the stock.