Jump to content

M&P 9 Pro Light Strikes


Recommended Posts

Posted

Out of ~400 rounds downrange I've come up with 4-5 light strikes (no strike really)

What I've done so far...

Took apart my striker assembly, inspected cleaned and reinstalled

Cleaned out the channel as good as I could

Striker looks good, its the new one.

Primers had no impact marks on them at all, these have all occurred in the heat of a match so there is a possibility the slide was out of battery slightly..

S&W sent me a label, I just hate sending guns back. Any suggestions? Was gonna buy a few new springs and maybe an assembly but can't find any.

  • Replies 8
  • Created
  • Last Reply

Top Posters In This Topic

Guest bkelm18
Posted

Let S&W look at it. Lifetime Warranty and all.

Posted

Let S&W look at it. Lifetime Warranty and all.

I agree, but first make sure there is no oil in the striker channel. Oil picks up dirt and stuff and will pack it into the channel.

If your not sure you got it all out try a q-tip soaked with cleaner, then a dry one.

  • Moderators
Posted

The striker assembly is only available as a full assembly and is a restricted part available only to certified armorers'. The M&P will not fire when it is 1/4" out of battery. I'd send it back to S&W.

Posted

Yeah, it's good, the channel that is

Then I'd send it back. Something wrong there, my m&p 40c fires every time no matter how fast you pull the trigger.

Posted

Sent it back, after much thought i'm targeting the firing pin safety. Has to be keeping the striker from fully engaging. I know its not out of battery because the trigger is not dead.

  • 2 weeks later...
Posted

Primers had no impact marks on them at all, these have all occurred in the heat of a match so there is a possibility the slide was out of battery slightly..

Out of battery was the culprit with my Pro. Was running a reduced power recoil spring and holstering would occasionally knock it a little out of battery. Holding thumb against back of slide when holstering solved the problem. BTW, I had zero problems when running factory spring.

Guest 270win
Posted

I had light strikes when shooting an M&P. A new striker assembly has been put in the gun. There have been three variations over time from what I understand.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.