Roll Pin Punch??

[Lumber_Jack]

Anyone know where I can buy a good set locally (Knoxville)? I can buy online, but I'm impatient.

[3gundave]

Randy's on Broadway normally has them. I bought a set there a few months ago.

[Lumber_Jack]

Randy's on Broadway normally has them. I bought a set there a few months ago.

Hmm that place never even crossed my mind. Thanks

[Garufa]

Hmm that place never even crossed my mind. Thanks

That place never crosses my mind either but it really is the only store in Knoxville that has just about everything, accessory-wise.

If you're doing an AR steel punches from WalMart will work...if you're careful and don't get to excited. Just grease the pins up before you start banging away.

[Lumber_Jack]

That place never crosses my mind either but it really is the only store in Knoxville that has just about everything, accessory-wise.

If you're doing an AR steel punches from WalMart will work...if you're careful and don't get to excited. Just grease the pins up before you start banging away.

Replacing the safety assembly on a PX4sc storm. They would probably be fine but I'd like to buy a decent set. Home Depot had a 3 punch set, but all of the 1/16" punches we're bent, IN THE PACKAGE. all 6 packages were the same. If I bend it that's one thing, but I'm not gonna buy them per-bent.

[timcalhoun]

The Bostitch set at lowes are not bad. Brownells is a good option for really good ones.

[Lumber_Jack]

The Bostitch set at lowes are not bad. Brownells is a good option for really good ones.

I just saw the Bostich at Lowes. Unfortunately I need a 3/32 and that was not in the set. I'll check locally tomorrow then just go online if I can't find some.

[Dolomite_supafly]

Chuck an oversized punch in a drill then sand or file it to size.

I generally make punches out of all the "extra" allen wrenches I have laying. They come with anything and everything these days so I have plenty.

Dolomite

[Guest A10thunderbolt]

Chuck an oversized punch in a drill then sand or file it to size.

I generally make punches out of all the "extra" allen wrenches I have laying. They come with anything and everything these days so I have plenty.

Dolomite

See now there's a good idea. I will log that one away for the future.

[Lumber_Jack]

Picked up a Lyman 4 punch set at Randy's today. It was $18 and it had the sizes I wanted and seemed nice enough.

Thanks 3gundave for the suggestion.

Edited May 8, 2012 by Lumber_Jack