ORSA Long Range Clinic Interest

[mikegideon]

Sorry to hear that, you should have cut a slot in the hand guard and used T-blocks and hex screws to attach the plate. ..

It's kinda what it is at this point. I'll have White Oak do that to my next upper . I'm just getting my feet wet with this one.

[Guest FroggyOne2]

Your 80's will fly at 1000 by the way.

[mikegideon]

Your 80's will fly at 1000 by the way.

I know. They'll be panting pretty hard when they get there. Don't know if they hit anything though with my long throat. Need to grab some 82's and try them as well. Champion's Choice is right down the road, and they stock all the good components.

I got load development to do. I did get all the sizing die stuff. Just haven't been on the bench.

[Guest FroggyOne2]

Run a ladder test, find the node then work in one tenth increments with three shot loads.. should find a hummer there somewhere..

[mikegideon]

Run a ladder test, find the node then work in one tenth increments with three shot loads.. should find a hummer there somewhere..

Gotta work a seating depth ladder first with the VLD's. I have a ladder loaded, but the neck tension is too tight. Just gotta hit the bench with the right bushings.

[Guest FroggyOne2]

What is the tension now?

[mikegideon]

What is the tension now?

About .002 too tight. May even be one source of the runout. Winchester bushing with Lapua brass.

[Guest FroggyOne2]

Ok.. we need to get this thread back on the subject at hand.. a long range clinic at ORSA

Mike I will PM ya about the tension

[Guest nmil]

This clinic interests me greatly, but I definitely don't have the hardware to compete. To be honest, I don't really even have the knowledge necessary to start buying the right hardware to compete.

[mikegideon]

This clinic interests me greatly, but I definitely don't have the hardware to compete. To be honest, I don't really even have the knowledge necessary to start buying the right hardware to compete.

I figure the clinic will fix that

[Guest FroggyOne2]

Indeed, you will garner a great bit of knowledge that weekend.

[Guest FroggyOne2]

Well spoke to another couple of fellows that are interested in attending.. we may indeed have a good group outting.

[zenman]

FroggyOne2 I tried to answer your PM but seems your mailbox is full.

[Guest FroggyOne2]

I fixed that.. try again.

[Guest FroggyOne2]

alpogi, when you come in for the clinic,.,we can talk about you staying at my place so that you don't have to spend money on a hotel room .. let me know.

[Guest phil357]

Hey guy's the first clinic is this Sunday. Please email me if interested. phendra @ tds .net

[Guest phil357]

Still a couple spots left this weekend. Email me if you are interested,

[Guest phil357]

Update the first post

[Guest phil357]

All three classes are open, you don't have to make all three claseesould like to get atleast 10 more shooters.

[Magiccarpetrides]

Phil Put me down for the April and May clinic will get with you on form and payment

THANKS!

edit: I am an ORSA member btw

Edited April 2, 2012 by Magiccarpetrides

[Guest phil357]

Magiccarpetrides got you down for the class.

Thanks,

Phil