fav 45 acp loads for reloaders

[ted]

let's see some of your fav 45 acp loads give details oal type and name bullets type primers type powders and grains etc. type of gun and barrel inches what groups you are shooting and what yardage

[leroy]

Let's start this off with two of my favorites. The first is 6.5 grains of unique and the hornady 230 grain flatnose. Seat 'em as long as ya can (...to max oal...). Use anyones standard primers.

Second one is 5.2 grains of titegroup with anybodys 230 grain bullet. Seat em as long as ya can. Use anybodies standard primers. Both these loads will shoot better than most folks can hold.

Hope this helps.

leroy

Edited May 15, 2011 by leroy
spellin!!!!

[Dad03]

I started with this and have not deviated from it yet : 225 grn cast lead FP, 4 grns Bullseye, CCI 300, 1.22 OAL.

With the exception of one trip to the range I have been pleased with this setup.

[Guest Grout]

5.4 grs Win 231,230 gr FMJ good hardball load.4.8 grs Win. WST (Super Target) 200 gr lsw good target load. Both loads are 1.250 in length

[Curiousgb]

5.4 grs Win 231,230 gr FMJ good hardball load.4.8 grs Win. WST (Super Target) 200 gr lsw good target load. Both loads are 1.250 in length

200gn LSWC over 4.8gn of WST.

[Guest TackleberryTom]

I just reloaded some 200gr LSWC, CCI primers and 4.0gr Bullseye. I shot a few with good results. Not sure yet if they are going to be my favorite yet. They are much cleaner than my ones loaded with unique though.

[Guest LetZrock]

My favorite is Winchester Super Target 4.6 grains Precision Delta 230 grain FMJ Winchester primer 1.275 OAL. Shoots great in a 5" 1911 and my G30.