Grip plug for Glock 30 "SF"?

[Guest spoolie]

Can someone point me in the correct direction, I've checked Google and Ebay. I got one off Ebay and dremel'ed it down but would like to have one that fit properly.

[Guest spoolie]

Nevermind...3 mins later I find one.

Close this.

[Mike]

Junk that. That hole is there for a reason.

Double feed and try to get the magazine out with that plug in there.

[Guest spoolie]

It just looks retarded with a extension pinky grip and that gap on the backside.

[I_Like_Pie]

Junk that. That hole is there for a reason.

Double feed and try to get the magazine out with that plug in there.

Clear jamb, press mag release, rinse & repeat

[Guest spoolie]

Not too bad...another 13.00, but this one will fit. I ruined the first 9.00 with a dremel tool but it fits.

[Mike]

Clear jamb, press mag release, rinse & repeat

Part of clearing a jamb on a double feed is pulling the magazine out. Most of the time on a double feed the magazine is wedged in very tight. You literally have to rip it out of the pistol. Just pressing the mag release will result in nothing.

[I_Like_Pie]

Part of clearing a jamb on a double feed is pulling the magazine out. Most of the time on a double feed the magazine is wedged in very tight. You literally have to rip it out of the pistol. Just pressing the mag release will result in nothing.

News to me...never been in a situation where it required anything other than the standard OP.

[Karnage]

Nevermind...3 mins later I find one.

Where did you find it? Been looking for one for 6 months.