anybody use BPI Multi-Hull Shotshell Hulls 410 Bore 2-1/2"

[Guest SRH]

since im starting with a fresh plate, i bought a bag of these from midway usa, Now i need to find out what wad and shot to use, did i see someplace here that there was a page with recipes on it for different loads? thanks

[enfield]

You didn't happen to get a copy of BPI's loading data for the hulls, did you? If not, contact BPI and you might get a complimentary copy of their .410 loading data. If not, let me know what powder and wads you have and I'll see what I can dig up.

I bought some of their 3 in. hulls last month but haven't gotten around to loading any yet -- too darn cold out in the shed, donchaknow.

[Guest SRH]

You didn't happen to get a copy of BPI's loading data for the hulls, did you? If not, contact BPI and you might get a complimentary copy of their .410 loading data. If not, let me know what powder and wads you have and I'll see what I can dig up.

I bought some of their 3 in. hulls last month but haven't gotten around to loading any yet -- too darn cold out in the shed, donchaknow.

no i didnt get any loading data with them and i tried to look it up but arent having any luck thanks for any help

im using 2 1/2" hulls and lil gun powder i still have to buy wads still

[enfield]

The load data I have available requires BPI wads for all loads using BPI hulls and Lil Gun powder - BPI stretch wad for 7/16 oz and 5/8 oz loads, BPI MG410 wad for 1/2 oz and BPI stump wads for 11/16 and 3/4 oz loads.

If you have to order wads from BPI, you might as well order a copy of their "The Small Bore Manual" to get their load data. www.ballisticproducts.com

[Guest SRH]

thanks yall i have BPI sending some data that i need