Place to get my Glock Barrels Jeweled

[Mglock66]

I live in clarksville and I own a Glock 27 and a 36. I think Jewelling the barrels would look sharp....where can i get this done close by? and how much should I expect to pay. Thanks in advance.

[Guest jos2f]

I'd also be interested in this information. I think a jewelled barrel looks great.

Although, I hear if you shoot your gun a whole lot, it can wear the jewelling and make it look bad

[Mglock66]

okay i did not know that.....something to consider!

[alwayspackin]

I had the barrel on my glock 26 done a few years ago. It looks really nice. It cost me 50 dollars with shipping. I searched for it online and then just picked one. I can't remember who I used but it only took a few days. It is the best bang for your buck if you’re sporting up your gun.

There are two types of jewelling. Small jewels and large jewels. I went with the large jewels; the small jewels appeared to me to have too much going on. I have shot several hundred rounds threw it since then and it still looks the same. You will have to make sure to keep a little extra oil on the barrel, since they remove the finish to bring out the stainless steel.

[Guest jos2f]

You can find a nice MidwayUSA video on youtube on how to jewel it yourself btw. Basically involves a drill press and a type of vice/rest for moving the bolt or barrel every x amount of inches.

If you have a press around, you can find the rest/stand for about $30 I think

[Guest Calaloo]

Jeweling is quite easily done with a brass rod of proper diameter in a drill press and grinding compound. A vise which is adjustable along the X and Y axis is used to properly space the sworls. Brownells sells a steel brush that works the same way.