Glock catalog is apparently shrinking…

[deerslayer]

Glock discontinuing lots of SKUs. I assume some of these are night sight guns.  Tariff-proofing or gen 6 is imminent?

PF2150201 GLOCK 21 SF STD FXD 5lb Std Mag Rls CA Comp 7 64503 07201 7
PF2150203 GLOCK 21 SF STD FXD 5.5lb Std Mag Rls 7 64503 07203 1
PI2250201 GLOCK 22 FXD 5.5lb CA Comp 7 64503 22502 4
PI2250203 GLOCK 22 FXD 5.5lb 7 64503 50222 4
PI2750201 GLOCK 27 FXD 5.5lb CA Comp 7 64503 27502 9
PF2950201 GLOCK 29 SF FXD 5.5lb CA Comp 7 64503 67201 9
PI3150201 GLOCK 31 FXD 5.5lb CA Comp 7 64503 31502 2
PI3150203 GLOCK 31 FXD 5.5lb 7 64503 50231 6
PI3250201 GLOCK 32 FXD 5.5lb CA Comp 7 64503 32502 1
PI3250203 GLOCK 32 FXD 5.5lb 7 64503 50232 3
PI3350201 GLOCK 33 FXD 5.5lb CA Comp 7 64503 33502 0
PI3430101 GLOCK 34 ADJ 4.5lb CA Comp 7 64503 34301 8
PI3430103 GLOCK 34 ADJ 4.5lb 7 64503 30134 6
PI3530101 GLOCK 35 ADJ 4.5lb CA Comp 7 64503 35301 7
PI3530103 GLOCK 35 ADJ 4.5lb 7 64503 30135 3
PI3650201FGR GLOCK 36FGR FXD 5.5lb (Not CA Compliant) 7 64503 91388 4
PI3750201 GLOCK 37 FXD 5.5lb 7 64503 37502 6
PI3850201 GLOCK 38 FXD 5.5lb 7 64503 38502 5
PI3950201 GLOCK 39 FXD 5.5lb 7 64503 39502 4
UI2250201 GLOCK 22 FXD 5.5lb 7 64503 00116 1
UI2250203 GLOCK 22 FXD 5.5lb 7 64503 00117 8
UI2750201 GLOCK 27 FXD 5.5lb 7 64503 00127 7
UF2950201 GLOCK 29 SF FXD 5.5lb 7 64503 05249 1
UI3430101 GLOCK 34 ADJ 4.5LB 7 64503 04873 9
UI3430103 GLOCK 34 ADJ 4.5LB 7 64503 04874 6
UI3650201FGR GLOCK 36FGR FXD 5.5lb (Not CA Compliant) 7 64503 05166 1
PG3150201 GLOCK 31 Gen4 FXD 5.5lb 7 64503 70201 3
PG3150203 GLOCK 31 Gen4 FXD 5.5lb 7 64503 70203 7
PG3250201 GLOCK 32 Gen4 FXD 5.5lb 7 64503 74201 9
PG3250203 GLOCK 32 Gen4 FXD 5.5lb 7 64503 74203 3
PG3350201 GLOCK 33 Gen4 FXD 5.5lb 7 64503 81201 9
PG3750201 GLOCK 37 Gen4 FXD 5.5lb 7 64503 68201 8
PG4030101MOS GLOCK 40 Gen4 ADJ 4.5lb M.O.S. 7 64503 00265 6
PG4030103MOS GLOCK 40 Gen4 ADJ 4.5lb M.O.S. 7 64503 00267 0
PG4130101 GLOCK 41 Gen4 ADJ 4.5lb 7 64503 91072 2
PG4130103 GLOCK 41 Gen4 ADJ 4.5lb 7 64503 91073 9
UG4030101MOS GLOCK 40 Gen4 ADJ 4.5lb M.O.S. 7 64503 05170 8
UG4030103MOS GLOCK 40 Gen4 ADJ 4.5lb M.O.S. 7 64503 05172 2
UG4130101MOS GLOCK 41 Gen4 MOS ADJ 4.5lb 7 64503 91385 3
UG4130103MOS GLOCK 41 Gen4 MOS ADJ 4.5lb 7 64503 91386 0
PA163S101MOS GLOCK 17L Gen5 MOS FS ADJ 4.5lb 10RD 7 64503 06259 9
PA163S103MOS GLOCK 17L Gen5 MOS FS ADJ 4.5lb 17RD 7 64503 06258 2
PA225S201 GLOCK 22 Gen5 FS FXD 5.5lb 10RD 7 64503 04370 3
PA225S203 GLOCK 22 Gen5 FS FXD 5.5lb 15RD 7 64503 04372 7
PA225S201MOS GLOCK 22 Gen5 MOS FS FXD 5.5lb 10RD 7 64503 04371 0
PA225S203MOS GLOCK 22 Gen5 MOS FS FXD 5.5lb 15RD 7 64503 04373 4
PA235S201 GLOCK 23 Gen5 FS FXD 5.5lb 10RD 7 64503 04389 5
PA235S203 GLOCK 23 Gen5 FS FXD 5.5lb 13RD 7 64503 04391 8
PA235S201MOS GLOCK 23 Gen5 MOS FS FXD 5.5lb 10RD 7 64503 04390 1
PA235S203MOS GLOCK 23 Gen5 MOS FS FXD 5.5lb 13RD 7 64503 04392 5
PA275S201 GLOCK 27 Gen5 FS FXD 5.5lb 9RD 7 64503 04407 6
PA295S201 GLOCK 29 Gen5 FS FXD 5.5lb 10RD 7 64503 06020 5
PA305S201 GLOCK 30 Gen5 FS FXD 5.5lb 10RD 7 64503 06021 2
PA343S101MOS GLOCK 34 Gen5 MOS FS ADJ 4.5lb 10RD 7 64503 03001 7
PA343S103MOS GLOCK 34 Gen5 MOS FS ADJ 4.5lb 17RD 7 64503 03002 4
PA495S201MOS GLOCK 49 MOS FS FX 5.5lb 10RD 7 64503 05840 0
PA495S203MOS GLOCK 49 MOS FS FX 5.5lb 15RD 7 64503 05842 4
UA225S201 GLOCK 22 Gen5 FS FXD 5.5lb 10RD 7 64503 04435 9
UA225S203 GLOCK 22 Gen5 FS FXD 5.5lb 15RD 7 64503 04437 3
UA225S201MOS GLOCK 22 Gen5 MOS FS FXD 5.5lb 10RD 7 64503 04452 6
UA225S203MOS GLOCK 22 Gen5 MOS FS FXD 5.5lb 15RD 7 64503 04453 3
UA235S201 GLOCK 23 Gen5 FS FXD 5.5lb 10RD 7 64503 04462 5
UA235S203 GLOCK 23 Gen5 FS FXD 5.5lb 13RD 7 64503 04463 2
UA235S201MOS GLOCK 23 Gen5 MOS FS FXD 5.5lb 10RD 7 64503 04472 4
UA235S203MOS GLOCK 23 Gen5 MOS FS FXD 5.5lb 13RD 7 64503 04473 1
UA275S201 GLOCK 27 Gen5 FS FXD 5.5lb 9RD 7 64503 04482 3
UA343S101MOS GLOCK 34 Gen5 MOS FS ADJ 4.5lb 10RD 7 64503 03932 4
UA343S103MOS GLOCK 34 Gen5 MOS FS ADJ 4.5lb 17RD 7 64503 04754 1
PN3150701 GLOCK 31 GNS 5.5 7 64503 31507 7
PN3350701 GLOCK 33 GNS 5.5 7 64503 01860 2
PN2250701 GLOCK 22 GNS 5.5 7 64503 22507 9
PN2250703 GLOCK 22 GNS 5.5 7 64503 91160 6
PN2350701 GLOCK 23 GNS 5.5 7 64503 23507 8
PN2350703 GLOCK 23 GNS 5.5 7 64503 50723 6
PN2750701 GLOCK 27 GNS 5.5 7 64503 27507 4
PA175S301AB GLOCK 17 Gen5 AmeriGlo Bold 5.5lb w/FS 7 64503 03714 6
PA175S303AB GLOCK 17 Gen5 AmeriGlo Bold 5.5lb w/FS 7 64503 03716 0
PA175S701 GLOCK 17 Gen5 GNS 5.5lb w/FS 7 64503 03718 4
PA175S703 GLOCK 17 Gen5 GNS 5.5lb w/FS 7 64503 03720 7
PN1750701 GLOCK 17 GNS 5.5 7 64503 17507 7
PN1750703 GLOCK 17 GNS 5.5 7 64503 50717 5
PA195S301AB GLOCK 19 Gen5 AmeriGlo Bold 5.5lb w/FS 7 64503 03727 6
PA195S303AB GLOCK 19 Gen5 AmeriGlo Bold 5.5lb w/FS 7 64503 03729 0
PA195S701 GLOCK 19 Gen5 GNS 5.5lb w/FS 7 64503 03730 6
PA195S703 GLOCK 19 Gen5 GNS 5.5lb w/FS 7 64503 03732 0
PN1950701 GLOCK 19 GNS 5.5 7 64503 19507 5
PN1950703 GLOCK 19 GNS 5.5 7 64503 04692 6
PN2650701 GLOCK 26 GNS 5.5 7 64503 04691 9
PX4350301AB GLOCK 43X AmeriGlo Bold 5.5lb 7 64503 03791 7
PX4350701 GLOCK 43X GNS 5.5lb 7 64503 03793 1
PA455S701 GLOCK 45 w/FS GNS 5.5lb 10rd 7 64503 03096 3
PA455S703 GLOCK 45 w/FS GNS 5.5lb 17rd 7 64503 03095 6
PA455S301AB GLOCK 45 w/FS Bold 5.5lb 10rd 7 64503 03100 7
PA455S303AB GLOCK 45 w/FS Bold 5.5lb 17rd 7 64503 03098 7
UA265S301AB GLOCK 26 Gen5 AmeriGlo Bold 5.5lb w/FS 7 64503 03735 1
UA265S701 GLOCK 26 Gen5 GNS 5.5lb w/FS 7 64503 03737 5
UI4250701 GLOCK 42 w/ GNS 7 64503 01546 5
UI4350701 GLOCK 43 w/ GNS 5.5lb 7 64503 03686 6
UX4350301FRAB GLOCK 43X AmeriGlo Bold 5.5lb w/front rails 7 64503 06331 2
UX4350701FR GLOCK 43X GNS 5.5lb w/front rails 7 64503 06332 9

[et45]

Trimming the fat.Looks like most are fixed sight models.The 17 has been rumored to leave the lineup for a while. I can kick myself for passing on a 17 MOS earlier this year for $400,that model was discontinued a year or two ago.

Edited April 5 by et45

[ken_mays]

I completely lost the plot with Glock models when they started introducing minor variations and combinations of G19 and G17 parts.   The last one I can tell you explicitly what it is was the Glock 45.   They need to get out of the weeds and back to basics. 

[deerslayer]

1 hour ago, et45 said:

Trimming the fat.Looks like most are fixed sight models.The 17 has been rumored to leave the lineup for a while. I can kick myself for passing on a 17 MOS earlier this year for $400,that model was discontinued a year or two ago.

I have a 17.5 MOS that has spent a lot of primers in Carry Optics division (both USPSA and IDPA).  The 47 pretty much killed the 17, but the only difference between the two that matters to me is the 47's use of a 19 spring/guide rod.  I'll probably pick up a 47 sooner or later for a gamer gun and will probably set up a 49 as a carry gun soon after.  

 

11 minutes ago, ken_mays said:

I completely lost the plot with Glock models when they started introducing minor variations and combinations of G19 and G17 parts.   The last one I can tell you explicitly what it is was the Glock 45.   They need to get out of the weeds and back to basics. 

The "I can put my 19 slide on a 17ish frame" modularity thing is kinda pointless to me, but the marketers have convinced many that it's revolutionary.  Probably splitting hairs, but I do like how the 19 spring on a 17 size gun is a little snappier (for red dot returning quickly to index purposes).  

Edited April 5 by deerslayer

[jhc77]

I’ve not been keeping up with Glock in the last year or 2. The 49 really has my attention. I wanted that XDS in 45 with the 4” barrel for ever but never had the funds for it before it got discontinued. I’ve mainly gone 9mm at this point but still have 2 in 45ACP. This might scratch that itch. I’ve had the 19X and liked it besides the grip length. Had a 17.5 later and same issue. 

[Defender]

I saw this yesterday in a video from the Glockstore:  

https://rumble.com/v6rm6h9-breaking-glock-news-glock-to-discontinue-a-lot-of-guns.html?mref=zxjwr&mc=76gis&_kx=6VbWrod690Kva4FCGGyU0LqfCGfnDXdCgj-SXD9CYEuLpW1R2MRENflJ3E_C0bsD.THLkmh

[pop pop]

I purchased a 19 2.0 Gen 5 about 3 years back. Still in the box and never fired it. Glock is just not my game even though I feel they are good accurate pistols. I also have an older 23 in 40 cal and have fired it many times. 

My cup of tea is pocket carry Revolver then SW MP 9 Cs. I have 3 and one is an EZ. All the same size. The EZ is a 11 shot single stack magazine with a little thinner grip.  the others are all 15 + 1. I IWB, at 4:00, carry these. Thinking of taking one and having a little better trigger (Timney) installed to see if I would like it better. That is the only rub on the MP series pistols I have. Really enjoy the MP series of pistols. Glocks, not so much. 

[steveo50]

Glock has lost it’s direction and trying to be sig. 

[TGO David]

50 minutes ago, steveo50 said:

Glock has lost it’s direction and trying to be sig. 

They are shrinking their catalog, not growing it.  The exact opposite of trying to be like Sig.

[steveo50]

10 hours ago, TGO David said:

They are shrinking their catalog, not growing it.  The exact opposite of trying to be like Sig.

True. To me it seems they are getting rid of a lot of iron sight models, assuming they are gearing up to sell only optic ready models.

Edited April 13 by steveo50

[TGO David]

4 hours ago, steveo50 said:

True. To me it seems they are getting rid of a lot of iron sight models, assuming they are gearing up to sell only optic ready models.

It is probably the most economical thing for them to do.  MOS models are of course capable of being run with iron sights only, so standardizing on a optics-ready slides means less product SKUs to produce and manage.

SIG really could take a lesson from them on this.

[threeshot]

At one of the Glock centric forums, one of the members called Smyrna GA regarding the discontinued models and was told by a customer service representative:

 

Quote

They are discontinuing many models, because they make up less than 8% of sales. This will free up tooling to produce new products, along with the most popular models.

Another member posted a 2022 BATFE's annual firearms report that supports the Glock customer service representative's information at the link below.

https://www.glocktalk.com/posts/33087369/

 

[Grayfox54]

I've noticed that this is getting a lot of comments on several gun boards. 

What's the big deal? They all look the same anyway. 

[TGO David]

3 minutes ago, Grayfox54 said:

What's the big deal? They all look the same anyway. 

Yeah, they look reliable.  

[deerslayer]

1 hour ago, Grayfox54 said:

I've noticed that this is getting a lot of comments on several gun boards. 

What's the big deal? They all look the same anyway. 

Each one has its own nuance.  

[tercel89]

Glock has always been the one gun company that would fix your old 25 year old or older Glock if it ever cracked or broke for almost free. Sometimes you might have to pay a small fee but they'd give you a new slide or frame for a fraction of what it would cost new. That type of customer service is awesome. I'm afraid that this will end now that Gaston is gone. I understand getting rid of low selling models but I vant stand buying a pistol with a red-dot cut-out on thr slide that I will never use. This just adds extra screws and parts to a gun. 

[deerslayer]

3 hours ago, tercel89 said:

I understand getting rid of low selling models but I vant stand buying a pistol with a red-dot cut-out on thr slide that I will never use. This just adds extra screws and parts to a gun. 

Also the MOS guns limit your choices for aftermarket rear sights, unless you are ok with the sight hanging over the back of the slide.  

[threeshot]

Glock US site now lists the discontinued models at the link below.

https://us.glock.com/en/discontinued-models

[deerslayer]

Most of these I get, but a couple are headscratchers - 

17L gen 5 and 49 just came out

34 is still common in the competitive world

[45guy]

On 4/13/2025 at 12:51 PM, TGO David said:

It is probably the most economical thing for them to do.  MOS models are of course capable of being run with iron sights only, so standardizing on a optics-ready slides means less product SKUs to produce and manage.

SIG really could take a lesson from them on this.

I know I will not buy another pistol thats not optics ready. 

[tercel89]

Glock is going to hell fire and hot rocks just like Toyota is. Both are making crappy decisions and crappy products since 2024. Both were the definition of reliability but no longer ! This is my experience and opinions. 

Edited Thursday at 10:54 PM by tercel89

[et45]

On 4/22/2025 at 10:49 AM, deerslayer said:

Also the MOS guns limit your choices for aftermarket rear sights, unless you are ok with the sight hanging over the back of the slide.  

Vogel and Tag Precision both make sight sets with the rear sight flush with the back of the slide and standard height.

[deerslayer]

3 hours ago, et45 said:

Vogel and Tag Precision both make sight sets with the rear sight flush with the back of the slide and standard height.

Maybe they saw the writing on the wall. 

Ameriglo has always has good options that were flush or OEM profile.  My favorite is Sevigny sights, which would hang WAY off the back of an MOS slide.  

Edited Friday at 10:55 PM by deerslayer

[et45]

1 hour ago, deerslayer said:

Maybe they saw the writing on the wall. 

Ameriglo has always has good options that were flush or OEM profile.  My favorite is Sevigny sights, which would hang WAY off the back of an MOS slide.  

I had never heard of Tag Precision until some YouTube guy dropped their name.They look great and a lot cheaper than the popular choices (Sevigny,Heinie,Vogel,etc)

[TGO David]

10-8 Performance and Night Fision are my go-to sights for Glocks these days.