sale-or-trade Aero M4E1 300 blackout - REDUCED - $700

[Thursty]

Aero (built) M4E1 lower

7.5 inch Ballistic Advantage 300 blackout barrel

 Noveske 7.2 inch free float handguard

VG6 Epsilon 7.62 brake

Sig Romeo 5 on a Unity style riser with back up irons integrated 

Sighted in and runs great with 110 Vmax. Will come with a full mag of that ammo. 

Would trade for a 5.56/.223 AR upper, 1911s, probably other stuff.

Edited August 19 by Thursty

[TGO AutoModerator]

 Safety Reminder for Buyers and Sellers 

This is an automatic reply meant to protect you as a buyer and a seller on TGO.

• Use the Buyer/Seller Feedback feature to research who you are dealing with.   Please come back and leave feedback for each other after the transaction is complete.  Your experience will help others.
   
• Never agree to use an electronic form of payment to buy or sell a gun!  None of the electronic payment services will protect you against fraud in a firearms transaction.  They all have terms of service FORBIDDING the use of their services to buy/sell guns.  DON'T DO IT.
   
• Be very wary of anyone who insists on brokering a deal in private or outside of TGO.  Scammers almost always prefer to operate out of the public eye.
   

The complete Trading Post Rules and also some more helpful suggestions can be found by clicking this link.  Everyone should read them at least once!

 

~~~ This was an automatic reply ~~~

[felinesNfreedom]

BCG included? if so brand. What upper receiver is on it? I'm assuming you put it all together.

[Thursty]

Lower is all Aero parts/built

BCG included. Toolcraft brand with a carpenter 158 bolt.

I built the upper. Upper is an Anderson. Barrel is a Ballistic Advantage 7.5 inch with a Noveske rail. This was a spare parts build so, if its preferred, I can swap out the 7.5 BA barrel with a 10.5 BA barrel with either the Noveske rail or I've got a Wilson Combat 8 inch rail. And I've got .30 cal birdcages if you're not into the break. Its effective but it is... loud.

I'd also sell just the upper, if someone already had a pistol lower, and/or I can separate the optic.

18 minutes ago, felinesNfreedom said:

BCG included? if so brand. What upper receiver is on it? I'm assuming you put it all together.

 

[felinesNfreedom]

I would plan on shooting subs through it with one of my cans so 7.5 is just fine. Do you know if there is enough space at the end of the rail to direct thread a can to the barrel? I've got a BCM mk2 BFH 16" upper sitting around I think I would be willing to trade if interested.  My biggest thing is making sure I can get a suppressor mounted to the barrel.

[Thursty]

1 hour ago, felinesNfreedom said:

I would plan on shooting subs through it with one of my cans so 7.5 is just fine. Do you know if there is enough space at the end of the rail to direct thread a can to the barrel? I've got a BCM mk2 BFH 16" upper sitting around I think I would be willing to trade if interested.  My biggest thing is making sure I can get a suppressor mounted to the barrel.

I'd be down for that trade, I don't know if it would direct thread though. The barrel shoulder is about 3/16 back from the end of the handguard (so part of the threads are under the handguard). I think it would depend on the thickness of your can. My Dead Air Nomad won't fit, but it is a notoriously fat can. I've got a can that will slide under the handguard, but its pretty narrow, and I use the Yankee Hill SRX mounts for my other cans. That mount spaces the suppressor just enough forward that it fits, but its not direct thread at that point. I've got a 1 inch thread extender, if you want it. Looks like this, with the extender on, would actually be a little shorter, but I left the crush washer on for a quick picture. 

[Thursty]

I didn't try this, but I imagine it would work with the thread extender and the 8 inch Wilson Combat handguard, to kill that gap a little bit. 

[Whisper]

Nice gun.  I'm not recognizing the device that's on the buffer tube.  It's a stock, and not a brace, right?  So this is an SBR and not a pistol?  Just wanting to make sure.  

[cknight8]

13 minutes ago, Whisper said:

Nice gun.  I'm not recognizing the device that's on the buffer tube.  It's a stock, and not a brace, right?  So this is an SBR and not a pistol?  Just wanting to make sure.  

I’m not the OP but that’s a Magpul BTR brace. Very short lived by Magpul as the brace “ban” went in right as the Magpul versions were getting popular, then like everyone else at that time Magpul quit selling them. I have several of them and they are my favorite braces in all honesty. 

[cknight8]

14 hours ago, Thursty said:

 and I use the Yankee Hill SRX mounts for my other cans.

I would love to talk with you via PM about those SRX mounts just to get your opinions on them (I’m highly considering a FatCat that uses those), I don’t want to clutter up your post here. 

Also, I don’t want to step in front of anyone here as it looks like you’re working a deal, but if the red dot and mount become available separately I would be interested in those.

 

Edited August 17 by cknight8

[Thursty]

So far gun is still for sale. 

[Thursty]

Bump