Case lube?Hornady,Dillion, or Frankford Arsenal?

[jeff43]

I’ve always used Hornady one shot, but thought about trying one of the other 2. Which do y’all like better?

Edited July 26 by jeff43

[Omega]

Currently partial to Imperial, but have used others in the past, Lee, RCBS, Hornady, Franklin etc., but imperial has been doing pretty good so far.

Imperial Sizing Die Wax 2 Oz by Redding (midsouthshooterssupply.com)

[gregintenn]

I’ve never felt the need to try anything other than the little tubes of Lee sizing wax. 

[krunchnik]

Hornady Oneshot for me-

[jeff43]

I’ve never used any of the wax, always the spray.Just seems faster

[Omega]

19 minutes ago, jeff43 said:

I’ve never used any of the wax, always the spray.Just seems faster

You would think, but it's not that slow when you think about it.  I put a magnet on the bottom of the tin, stick it on the riser of the press and I lube when I am putting the case in the shell holder, gets to be second nature and it's pretty fast. And this way, I don't have to worry about one case not getting enough lube with the spray.  The spray isn't bad, it just gets all in the case as well on some of the cases, and there is no consistency on which are lubed internally and which ones are not which can throw off your Standard Deviation (SD).  The liquids with a pad aren't bad either, but you have to keep adding lube and it's hard to notice when the pad has become dry.

[jeff43]

22 hours ago, Omega said:

You would think, but it's not that slow when you think about it.  I put a magnet on the bottom of the tin, stick it on the riser of the press and I lube when I am putting the case in the shell holder, gets to be second nature and it's pretty fast. And this way, I don't have to worry about one case not getting enough lube with the spray.  The spray isn't bad, it just gets all in the case as well on some of the cases, and there is no consistency on which are lubed internally and which ones are not which can throw off your Standard Deviation (SD).  The liquids with a pad aren't bad either, but you have to keep adding lube and it's hard to notice when the pad has become dry.

I have a Dillion 550 that so far I’ve only loaded handgun rounds on. I got 2 other RCBS presses for rifle rounds ,but in the future I’m gonna load some .223 on the Dillion.Does anyone here load rifle rounds on your Dillion? How do you go about lubing  for it? In large amounts.

Edited July 27 by jeff43

[RED333]

I have used about everything, useing Never Seez now.

[BigK]

I have an orange plastic case with a pad inside. I spray some OneShot on it every once in a while and roll about 1 in 50  pcs of brass onto the pad. The Dillon XL650 and pistol only may be why that works for me. I'm only on my 2nd bottle ever.

Edited July 27 by BigK

[scatman]

I have been using a RCBS lube pad with Hornady Unique case lube for 15 years. 

[DeepSouth]

Dad got a RCBS lube pad in one of his estate deals. We looked online for the best/cheapest lube. One guy was using 30W-SAE oil, 90 cents per quart at the time. Still have a bit more than half a bottle. Stab every 15 to 20th case neck into the pad seems to work good. Trimming seems to go faster. All the brass gets tumbled in corn cob media with polish before primming and loading so oil is removed. Have reloaded most of the same 10,000 223 cases per year for the past 12 years without the first stuck case.

 

Edited August 15 by DeepSouth

[chances R]

Hornady lock n load for pistols only.  Light dusting of one shot makes things smoother.

[derf]

I have a Dillon 550 loading .223 and a Dillon loading 45 acp. I use one shot for everything. 

[SpeedyR]

really depends upon what you are using it for. If you are doing precision reloading, case forming, etc, then it's hard to beat imperial sizing wax. If you are doing mass quantities, I prefer a spray. One shot is a sure fire way to getting stuck cases IMHO.  I have moved to lanolin/alcohol mix. You can buy pure lanolin oil on amazon, and 95% alcohol. Mix up 1:10 (lanolin:alcohol) and put in a spray bottle and you are ready to go. Get a cheap plastic tub from dollar store, spray lube over cases, shake around, let alcohol evaporate, and smooth as silk resizing/loading. 

[ohell]

X2 on making lanolin/alcohol mix for bulk necked case reloading. It’s basically the same as the Dillon lube.  

[Bad_Bowtie]

Another lanolin/alcohol user here. 

 

https://www.ar15.com/forums/armory/Case-Lube-for-cheap-bastards/42-305174/

[Toy4Rick]

23 hours ago, Bad_Bowtie said:

Another lanolin/alcohol user here. 

 

https://www.ar15.com/forums/armory/Case-Lube-for-cheap-bastards/42-305174/

Another lanolin/alcohol user here

[ken_mays]

I’ve settled on Frankford spray lube for rifle cases.   I use One Shot spray for my pistol cases when loading on a progressive press but I find that I have to use too much of it for rifle cases and it’s relatively expensive.  The Frankford lube migrates better and I don’t have to use as much.  
 

I use a lot of plastic shoebox style containers to store brass and I dump a couple handfuls on the lid and spray over them. A few minutes and they are ready to load.  

Edited September 1 by ken_mays

[jeff43]

I see some say you are getting stuck cases with One shot. How come? 

[krunchnik]

I see where some are using lube for pistols-

I never have and use nothing but carbide dies for pistol reloading-

[deerslayer]

For rifle cases, I use Dillon or Frankford spray lube on an RCBS pad.  For pistol ammo on the 550 (with carbide dies), I spray inside the sizing die with Liquid Wrench dry lube every 100 or so rounds. 

[leroy]

On 9/21/2024 at 8:31 PM, krunchnik said:

I see where some are using lube for pistols-

I never have and use nothing but carbide dies for pistol reloading-

Ta add to what krunchnik opined, I've sized a many a straight walled pistol case in steel dies with no other lube on my hands than the natural oil on the hand. 

That said, the real answer for pistols is carbide dies, and for bottle necked rifles, a real good lube. 

I like Imperial Sizing Wax a lot...

leroy..