for-sale $100 Delta ShopMaster 10" 13-Amp portable table saw with stand (Bellevue)

[monkeylizard]

I have a Delta ShopMaster 10" 13-Amp portable table saw with a stand. I don't have the pins/toggles that attach the saw to the stand. It's just 4 holes so any bolt that fits in the holes will do.

The saw has a solid anodized-aluminum table that measures 17-1/2 by 34 inches. It allows for a 20-inch maximum rip to the right of the blade and a maximum depth of cut at 90° of 3" (76mm). The blade has a diameter of 10" (254 mm) and operates at a speed of 5000 rpm. The saw also features a front- and rear-locking T-square-type fence and a miter gauge with adjustable 90° and 45° stops. The motor is protected by a thermal overload protection system.

Currently equipped with a 24-tooth blade for rough cuts. I wouldn't us that blade for any fine cuts but it works great on lumber and I used it to rip some oak plank flooring. It was plenty good for that.

Located in Bellevue (west side of Nashville). I work near  the Nashville airport and can meet in that area too.

$100

 

[TGO AutoModerator]

 Safety Reminder for Buyers and Sellers 

This is an automatic reply meant to protect you as a buyer and a seller on TGO.

• Use the Buyer/Seller Feedback feature to research who you are dealing with.   Please come back and leave feedback for each other after the transaction is complete.  Your experience will help others.
   
• Never agree to use an electronic form of payment to buy or sell a gun!  None of the electronic payment services will protect you against fraud in a firearms transaction.  They all have terms of service FORBIDDING the use of their services to buy/sell guns.  DON'T DO IT.
   
• Be very wary of anyone who insists on brokering a deal in private or outside of TGO.  Scammers almost always prefer to operate out of the public eye.
   

The complete Trading Post Rules and also some more helpful suggestions can be found by clicking this link.  Everyone should read them at least once!

 

~~~ This was an automatic reply ~~~