A "Lightly" Customized Beretta

[mamcdonald]

I picked this up last year used, a Wilson Combat 92G with the Vertec grip. The previous owner had sprung for the mag guide and Wilson's action job which is seriously slick (averages 2.5lbs SA and about 5lb DA on my digital trigger gauge), they had also had a Jarvis Custom barrel and single-port comp fitted along with a Jarvis steel guide rod. When I got it it was a very fast, very flat shooting and very fun gun, so I decided to see what else I could add to it.

Smash cut to last week: I got my slide back from Langdon after sending it out for their optic cut. They replace a lot of the little fiddly bits in the slide with ones of their design to facilitate a (slightly) lower height over bore than the Beretta system, with the trade-off that you lose your rear sight dovetail so you are locked in to using their mount plates. They also replace the front sight to cowitness/align with the plate's rear irons. I opted for the RMR footprint but if I decide to go with something else for some reason in the future it's a pretty easy plate swap. Planned to use a 507Comp but after getting it back I decided I wanted to carry it sometimes so I went with the thinner 507C. Anyways here's wonderwall my Langdon Tactical/Jarvis Custom/Wilson Combat 92: