Jump to content

The ongoing saga of my motorcycle builds....


Recommended Posts

I'm looking at buying myself a very used bike, specifically a Road Kind, Fatboy/bob or Heritage. One of the fat front end jobs. 

It's going to get a complete strip down & do away with all of the unnecessary bits (fenders, turn signals, shiny bits, any freaking HINT of tassels....) & I'm on a super low budget. I'm not concerned about a title, even. I've titled bikes before & the hassle, to me, is worth the money saving.

Anyway, aside from all that, what I'm wanting to know is, in my price range I'm looking at late Evo & early Twin Cam bikes, probably with pretty high mileage & multiple (I would assume, knowing "Harley Types") clueless previous owners. Which would be the better motor to go with? 

My knowledge of big twins is pretty much limited to sidevalve 45s & later Shovels.

Edited by Handsome Rob
Link to comment

The last I had were the late twin cams - 2016 Street Glide Special which I got rid of and got a 2016 Heritage. Loved both, but I needed a new 4wheeler, so, 'tis what 'tis. 

I didn't have any problems out of those, but I always wished I had gone retro and got a late model Evo. 

If you get an early twin cam, if I remember right, you'll need to go in and replace the cam chain tensioners. They can be a good engine but probably need a few things done. 

  • Like 1
Link to comment

Evo and Twin Cam are both good motors, but Evo motor parts are getting harder to find, Harley doesn't make them any more so its new old stock or used. I would go with early Twin Cam, can get them with a carb, so they are easier to work on. Only issue I can think of with the early motors is the cam chain tensioner which did not work properly, buy there are replacements for it. I currently have a 2010 road Glide with 40k+ miles and no issues with it at all.

PM me with any questions you may have.

  • Like 1
  • Thanks 1
Link to comment

I had a 2000 RK, did the big bore kit on it (cam, pistons, exhaust & tuner), and it was a hoss in terms of low end grunt/torque.  I never had a problem with the engine or the bike, but you were almost required to do some mods to the engine as the factory detuned all the power out to meet EPA crap.  GLW the search.

  • Like 1
Link to comment

I expect you've looked at Facebook Marketplace. That's my go-to when I'm looking for a "new" bike.  I've owned a lot of HD's, but I'm done with them. But one great thing about HD is that you can ALWAYS find repro parts. There are a lot of businesses out there to service the obsolete HD market. GL!

  • Thanks 1
Link to comment
Just now, Alleycat72 said:

Just get an Indian scout bobber and save 10k.

I'm only planning on spending 4, tops! Fingies crossed I can claw a little bit of that back by selling off everything that doesn't make it start, stop or go around corners. 

Link to comment
Posted (edited)

Evo was a good motor

The twin cams were good also, and not every year had the cam chain issue. My "02 didnt, so maybe it was the later years? Plus, most of mine were fuel injected, but never had a issue with the FI system.

In 2017 I sold a '10 Ultra Classic that I put 72,000 on and it still ran great. Never  had anything but maybe 2 minor issues. My '02 Deuce went 40,000 without any issues at all.

Bought a used bike this time instead of new ('12 Road Glide Ultra) and I let the other guy take the hit in cash-lol

My point is I'm a fan of the twin cams

Edited by Tom B
  • Like 1
Link to comment

I put 93,000 miles on my Evo before I sold it, it still ran fine, never an issue. 

The twin cam cam chain tensioner issue- the tensioner shoes were made of an inferior material that tends to wear out. I checked mine (2004 Deuce) the other day at 49,000 miles and they still look good but I have heard of them failing at 30K. Harley mechanic told me that regular oil changes with synthetic oil keeps them alive longer. The cheapest fix is to replace the shoes with an aftermarket shoe eg: Cyco brand. Can also go with gear drive cams which eliminate the chain and tensioners or install the Harley upgrade which is an upgraded oil pump with hydraulic tensioners that supposedly last much longer. There may be other options that I'm unaware of.

Harley changed the setup in some late 2006 models and all 2007 models so any 2007 + won't have the issue. 

  • Like 1
Link to comment
  • 2 weeks later...

UPDATE:

Screenshot_20240507_152340_Facebook.jpg.13fb02c73212e45d7c1fd50761a6e070.jpg

Well, I couldn't pass it up. 5 grand, 23k on the clock & a full, detailed, dealer service history & the engine is completely stock. She runs like a sewing machine too. An absolutely perfect example of a tart's handbag. 😆

Unfortunately, I have no idea how it rides because the seals blew out of the front master cylinder, unloading it from the trailer 🤬

But, silver lining, that's given me the time & opportunity to eighty-six all the tassels (there were soooo many tassels!) ditch the front fender & turn signals, & lower the rear end 2" I've got wider, flatter handlebars ordered, a pair of fishtails, air cleaner & carb jets & needles, along with a new rear fender, gas tanks, Le Pera Barebones seat (I sold the original for an obscene amount)  & about 4 gallons of black paint. I'd planned on chopping & painting the original tins, but then I saw how much they sold for on ebay (significantly more than half of what I paid for the bike! 😳) and mine are literally unmarked. Not a single blemish in the paint, at all. 

This is how she's sitting as of 5pm tonight (minus the seat) 

20240514_140644.thumb.jpg.23597941adc52a9978c5480a7027b23a.jpg

About an hour after I took that, the exhaust heat shields got the matte black treatment. 

  • Like 3
Link to comment
On 4/30/2024 at 8:53 AM, Handsome Rob said:

Out of interest, it's going to end up not dissimilar to this.....mh02.jpg.a26707133ffda08df1fb3a9776965107.jpg

 

This has an exile cycles look to it.   I love Russell's bikes. 

Link to comment
Posted (edited)

Not a bad looking bike. It's a shame you are about to destroy it. What year model is it?

 

Looks like an Evo engine. They are quite desirable now.

Edited by gregintenn
Link to comment
58 minutes ago, gregintenn said:

Not a bad looking bike. It's a shame you are about to destroy it. What year model is it?

 

Looks like an Evo engine. They are quite desirable now.

It's a '99 FLSTC (Heritage Classic) the last year of the Evo.

"Destroy" is very subjective. I don't like shiny. I like useable without worrying. Hence, selling the Model 70.... 

If I wanted a shiny bike to ogle, I'd have saved $4,990 & bought a poster 😘

Link to comment
1 hour ago, gregintenn said:

Not a bad looking bike. It's a shame you are about to destroy it. What year model is it?

 

Looks like an Evo engine. They are quite desirable now.

Now, tell me these aren't as sexy as hell.

c385bf09534a485f4ecef566f53bd190.jpg

dyna-fat-bob-rough-crafts-4-625x625.jpg

img_1314.jpg

  • Like 2
Link to comment
35 minutes ago, gregintenn said:

I don't care for it, Rob. My favorite color is chrome!😁 By the way, you stole that bike!

I was at a Mardi Gras street party down in Baton Rouge many years ago and a guy pulled up on a big chrome Harley and I do mean CHROME.  Every inch of that bike was chrome plated...tank, fenders, all of it.  It was most impressive.

  • Love 1
Link to comment
1 hour ago, gregintenn said:

I don't care for it, Rob. My favorite color is chrome!😁 By the way, you stole that bike!

hCldzmO.jpg

Hey, someone has to represent during Pride week, no judgment here! 🏳️‍🌈 😃

  • Haha 2
Link to comment
Posted (edited)

I LOVE the black bobber builds. When I had my vstar 650 this was my dream. Just never had the nerve to cut up a my bike.

spacer.png

Edited by Smith
  • Love 3
Link to comment
1 hour ago, Handsome Rob said:

Hey, someone has to represent during Pride week, no judgment here! 🏳️‍🌈 😃

Well, I’m just a Harley guy. I reckon I overlooked the “knowledgeable” part of your request.😁

  • Haha 1
Link to comment
On 4/30/2024 at 8:44 AM, Handsome Rob said:

I'm looking at buying myself a very used bike, specifically a Road Kind, Fatboy/bob or Heritage. One of the fat front end jobs. 

It's going to get a complete strip down & do away with all of the unnecessary bits (fenders, turn signals, shiny bits, any freaking HINT of tassels....) & I'm on a super low budget. I'm not concerned about a title, even. I've titled bikes before & the hassle, to me, is worth the money saving.

Anyway, aside from all that, what I'm wanting to know is, in my price range I'm looking at late Evo & early Twin Cam bikes, probably with pretty high mileage & multiple (I would assume, knowing "Harley Types") clueless previous owners. Which would be the better motor to go with? 

My knowledge of big twins is pretty much limited to sidevalve 45s & later Shovels.

I'm quite fond of shovel heads myself. Solid lifters. Might sound like it's coming apart but they run awesome and are dependable. Plus, you can use Chevy points if you need to in a pinch.

  • Like 1
Link to comment
34 minutes ago, Sinuous said:

Solid lifters

Shovelheads came from the factory with hydraulic lifters, and I found they worked great. I never understood why anyone would switch to solid lifters with all their noise. But to each his own!

  • Like 1
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.