Scope base for a M38 Swedish Mauser?

[jeff43]

I have a M38 6.5x55 Swedish Mauser somebody through time has drilled and tapped it. The two piece weaver bases I have  seem to tilt the front of the scope down. Bore sighting it it is low and left at about 40 yards, then I run out of adjustment. I’ve tried 2 different scopes. Is the receiver on these 2 different heights? I thought about trying a EGW mount.Any thoughts on this?

[Grayfox54]

Get some shims and raise the front mount or get a mount made for that rifle. 

[jeff43]

2 hours ago, Grayfox54 said:

Get some shims and raise the front mount or get a mount made for that rifle. 

May order a EGW mount and try it.

[gregintenn]

Do small ring and large ring Mausers use different scope bases?

What numbers are on the mounts. 46 and 55?

Edited February 12 by gregintenn

[jeff43]

Wonder how solid one of these would be? Bad ace Tactical

Edited February 12 by jeff43

[jeremy67A]

I bought this one for a Swedish Mauser. https://www.kenfarrell.com/index.php?route=common/home

[tk1987]

On 2/11/2024 at 7:16 PM, jeff43 said:

Wonder how solid one of these would be? Bad ace Tactical

I had one for made Yugo Mauser . It was pretty solid