Savage 110 help

[Quavodus]

My Savage 110 extracts the case but, it drops loose from bolt and won't eject. Is the extractor broke? I've done a fair amount of gun tinkering over the years, and saved myself a lot of money but, have never done any work on a 110. Thanks

[krunchnik]

Sounds like you have a ejector problem-extractor does just that by pulling the empty from the chamber-then the ejector does it's job by just that ejecting.

I think in the bolt face it should have a ejector mounted on a spring that forcibly pushes the brass out from the facing.

There are a few different makers of kits that are upgrades from factory parts.

[Alleycat72]

What cartridge are you shooting? Load a pic of the bolt face. 110 long or short. They recently changed them all to the 110 designation. I probably have an extra enhanced ejector for a Savage.

[Quavodus]

So do you think it would probably be ok just to replace extractor and ejector both?

[Quavodus]

Its the 110 long action. Which is weird because its a .223. 

[Alleycat72]

1 minute ago, Quavodus said:

Its the 110 long action. Which is weird because its a .223. 

That's your problem. Give me a sec. 

[Alleycat72]

This is what you need. 

[robin48]

This is why I love TGO!