Haven't put a knife together in a while...

[gregintenn]

So I ordered a blade and scales from knifekits.com. The handles are amber dyed, jigged camel bone. Of course the blade is damascus.

My hat's off to you knife makers. This is rather trying on one's patience.

Edited August 23, 2020 by gregintenn

[peejman]

Looks good, what gave you trouble?

[gregintenn]

Just now, peejman said:

Looks good, what gave you trouble?

To be honest, I cracked one of the scales while flaring the pins. It epoxied back together pretty well, and I think it'll stay, but I'd never sell something like that. It'll still gut deer, however.

[xsubsailor]

Looks good to me. 

[RED333]

I like it, good job.

[Ronald_55]

Good job!

I have all the pieces to get one together, but I cheated and ordered the screws you use instead of pins. I would be pretty miffed if I broke a scale. 

I wonder if you could build a jig to fit in a vice with multiple holes to put hardened steel pins in to match the ones you want flared. Then just crank down the vise. I wonder if that would be enough force?

[gregintenn]

25 minutes ago, Ronald_55 said:

Good job!

I have all the pieces to get one together, but I cheated and ordered the screws you use instead of pins. I would be pretty miffed if I broke a scale. 

I wonder if you could build a jig to fit in a vice with multiple holes to put hardened steel pins in to match the ones you want flared. Then just crank down the vise. I wonder if that would be enough force?

No idea. All I needed was a smaller hammer. LOL!

[joe4vol]

47 minutes ago, gregintenn said:

No idea. All I needed was a smaller hammer. LOL!

Or one less hit. 

[TomInMN]

5 hours ago, gregintenn said:

No idea. All I needed was a smaller hammer. LOL!

Whoawhoawhoa! Now that just ain't right. Can't be!

[Chucktshoes]

5 hours ago, gregintenn said:

No idea. All I needed was a smaller hammer. LOL!

 

5 minutes ago, TomInMN said:

Whoawhoawhoa! Now that just ain't right. Can't be!

Right? That’s entirely counter to everything I’ve ever learned about percussive maintenance. 

[Grand Torino]

That looks great! And yes...sometimes it gets really tedious.  That's what's great for me as far as doing it as a hobby. I can just walk away. I'm trying to live a stress free life. 

[TripleGGG]

Looks great. Me and tedious don't so well together most of the time. I'm like @Chucktshoes, if it's not work in one only needs the next hammer size up. Rinse and repeat until task is accomplished.

Hence @Grand Torino is my go to for all things sharp! 

[gregintenn]

37 minutes ago, TripleGGG said:

Looks great. Me and tedious don't so well together most of the time. I'm like @Chucktshoes, if it's not work in one only needs the next hammer size up. Rinse and repeat until task is accomplished.

Hence @Grand Torino is my go to for all things sharp! 

Oh, I have quite an impressive collection of his work as well.

[Quavodus]

On ‎8‎/‎23‎/‎2020 at 8:26 AM, Ronald_55 said:

Good job!

I have all the pieces to get one together, but I cheated and ordered the screws you use instead of pins. I would be pretty miffed if I broke a scale. 

I wonder if you could build a jig to fit in a vice with multiple holes to put hardened steel pins in to match the ones you want flared. Then just crank down the vise. I wonder if that would be enough force?

I've used pins made out of brassing rod. Works good.

[gregintenn]

I got the blade, pins, and scales at knifekits.com, in case anyone else here wants to put one together. I can highly recommend this company.

I’ve field dressed deer with a large variety of knives, and can say this one is closer to perfect for that task than any I’ve tried.

 

[KahrMan]

What is the blade length?  Looks like a good skinner. 

[gregintenn]

3 hours ago, KahrMan said:

What is the blade length?  Looks like a good skinner. 

https://www.knifekits.com/vcom/dixie-gambler-knife-kit-damascus-full-tang-blade-blank-p-7523.html

Looks like 2 7/8".

[Quavodus]

I need to get my brother to make me a sheath for a couple I made back in the Summer. Looks good Greg.

[aknifemaker]

Really nice job, but never heard anyone say they needed a smaller

hammer

[robin48]

No way I'd have the patience for this. 

[gregintenn]

21 hours ago, robin48 said:

No way I'd have the patience for this. 

Sure you would. If I can, anybody can! Just take you time and do a little bit and put it away. You ain’t getting it done tonight anyway.

[gregintenn]

My latest effort.....and yes, the other side has a split handle.

[Quavodus]

Looks good . I've not done one in a few months. I sold one of the last I did, to a guy I work with.

[gregintenn]

1 hour ago, Quavodus said:

Looks good . I've not done one in a few months. I sold one of the last I did, to a guy I work with.

Surely you have a digital camera. On your phone perhaps?

[Grand Torino]

On 1/18/2021 at 3:33 PM, gregintenn said:

My latest effort.....and yes, the other side has a split handle.

Looks great! Here is a tip for you...use smaller diameter pins. They peen easier with very little force.