Post pictures of your: Evil Black Rifle

[Jon_L]

I LIKE it!

Off to build a 9mm AR, I suppose.

[LA_357SIG]

Lower receiver put together by my 11 year old son for his birthday present.

RRA 16" SS midlength upper. ( 2.7lb barrel currently at ADCO for countouring)

S&W stripped lower

Spike's LPK

Troy S&W marked rear sight and Claymore muzzle device

Magpul furniture

BCM receiver extension and H buffer

And a quick mock up while I had the barrel out with spare receiver I have laying around:

Edited August 25, 2011 by LA_357SIG

[LA_357SIG]

And the rest of the boys:

[LI0NSFAN]

Just a fun mod to a 10/22. Shoots better than expected.

[LI0NSFAN]

Custom Paint on my Nagant

[JeffsSig]

One of the better looking Nagants I have seen.

You just used paint?

Is that a hand-gun scope on it?

Custom Paint on my Nagant

[Mark@Sea]

CMP M1 H&R, shoots 1/3 MOA with surplus Lake City ammo. Rebuilt for me on a laminate stock almost 20 years ago by a USMC armorer. Not black, do I still get cool points?

[/img]

[Jasongar8]

A M1 is cool any day of the week.

[LI0NSFAN]

One of the better looking Nagants I have seen.

You just used paint?

Is that a hand-gun scope on it?

It took a lot of sanding to get the stock to feel good to me, then I painted it and several layers of sealer. I had a friend throw a pistol scope on his to see the accuracy of the gun and he found it held zero better so I tried and he was right. Apparently you can buy a midlevel pistol scope or a high end rifle scope for them. I chose not to spent more on the scope than the rifle. It shoots great and had held zero for over 200 rounds.

[MattCary]

Ok, I'll play!

The EBR:

And the UBR (Ugly Black Rifle:)

Edited August 28, 2011 by MattCary

[Trekbike]

Did you just polish the bluing off the barrel and receiver to get that finish? If so, give some details if you did anything special except a lot of hard work. I'd like to see some more pictures if you wouldn't mind. Pretty cool Mosin.

Custom Paint on my Nagant

[LI0NSFAN]

ALOT of elbow grease. It took near 30 hours just on the barrel. It was about a 40 hour project. For all the purest out there and all the people that sent hateful PM's to me. The only part of this gun that was remotely good was the bore. Stock had previously been "restored" I think they used shellack. The outer part of the barrel had several rub marks on it. and the rear sights were missing. Shot great (8 inch groupings at 100 yards) for a $40.00 gun. I took scope and bi-pod off of other guns and now have less than $75.00 into it. Still not done, getting rid of sight and bayonet lug.

[JeffsSig]

No not BLACK but this gun will out shoot ANY black gun I have shot.

And yes I know from experience it will as Mark allowed me to shoot it the other day.

My first word was WOW.

Mark made me a believer.!!!!

CMP M1 H&R, shoots 1/3 MOA with surplus Lake City ammo. Rebuilt for me on a laminate stock almost 20 years ago by a USMC armorer. Not black, do I still get cool points?

[/img]

[Seaslug]

ALOT of elbow grease. It took near 30 hours just on the barrel. It was about a 40 hour project. For all the purest out there and all the people that sent hateful PM's to me. The only part of this gun that was remotely good was the bore. Stock had previously been "restored" I think they used shellack. The outer part of the barrel had several rub marks on it. and the rear sights were missing. Shot great (8 inch groupings at 100 yards) for a $40.00 gun. I took scope and bi-pod off of other guns and now have less than $75.00 into it. Still not done, getting rid of sight and bayonet lug.

Anyone that sent you a hateful PM is a complete moron, and I'd have no problem telling them that myself. Great job restoring that Mosin and making it YOUR OWN.

[Guest bkelm18]

For all the purest out there and all the people that sent hateful PM's to me.

I always giggle when people talk about keeping a Mosin pure and original. It's a $70 rifle. There were tens of millions produced over its lifetime. Get a life people.

Edited October 21, 2011 by bkelm18
Accuracy

[LI0NSFAN]

I feel the same way about them. They are fun to shoot and cheap enough to buy several. Why not own a couple and have fun making one your own.

[Trekbike]

There were hundreds of thousands (if not millions) produced over its lifetime. Get a life people.

Wikipedia says 37 million. Yea...Get a life people.

Climberscott, how about some more pictures?

[cz75b]

i guess this thread is still active.so here it is.doublestar lower and internals,ergo grip,magpul ctr stock,spikes tactical mil-spec buffer tube stainless spring and st-t2 buffer,magpul asap,magpul b.a.d,doublestar upper with doublestar tactical lightweight fluted barrel,yankee hill flip up front sights,a.r.m.s flip up rears,knights armament quad rail handguards,vortex striker flash hider,and surefire 6 volt tac light,and grip pod.debating on putting gen1 redimag on it.

IMG_0115 | Flickr - Photo Sharing!

[LI0NSFAN]

I will see about more pics, It is currently apart for some more work (taking the bayonet lug and sight off). I am also making a paracord sling for it. Any suggestions on the color of the sling. I don't think that black would look that great.

[PolePosition]

My Mk18 Mod 0 clone built by Wes at MSTN (upper is for sale if anyone is interested)

Stag lower

LMT 10.5" upper

LMT adjustable rear sight

Crane SOPMOD stock

Larue free-float quad rails

KAC VFG

PRI gasbuster charging handle

PRI optic mount

Aimpoint Comp M2

Magpul P-mag

[TMF]

The closet.

[scoutfsu]

My Mk18 Mod 0 clone built by Wes at MSTN (upper is for sale if anyone is interested)

Wes builds amazing rifles and is an awesome guy.

My latest -

Edited September 14, 2011 by scoutfsu

[k9wh91984]

Stag Arms Model 2 Flat top AR15/M4 ALL MILSPEC and MAGPUL FANBOY RIFLE

MI Flip rear sight

BlackHawk quad rail

Magpul CTR stock, Magpul MOE GRIP, Magpul B.A.D Lever, Magpul 30 round magazines, Magpul ASAP single point sling adapter, Magpul MOE Vertical Grip, Magpul Ladder Rail Panels, TROY Claymore Muzzle Break, SureFire G2L light and Viking Tactical Light mount, EOTech 517 Holographic sight

Not pictured on rifle: Magpul MS2 Sling, BCM GUNFIGHTER CHARGING HANDLE

[Seaslug]

Yet another update to my Mk18. This one's getting pretty clone-ish at this point...

[Sandman]

Yet another update to my Mk18. This one's getting pretty clone-ish at this point...

What's the thing on top?