S&W M&P 15-22 safety alert

[xsubsailor]

You guys that have these need to have them checked/fixed before they go full auto on you. 

https://www.smith-wesson.com/mp15-22-consumer-safety-alert

[Chucktshoes]

Is that a bug or a feature?  ¯\_(ツ)_/¯ 

 

Seriously tho, get your gear fixed before the folks at Burn All Toddlers First try and hem you up for loaning a rifle that ends up malfunctioning to a friend and call it “transferring an unlicensed machine gun.” 

Edited March 8, 2019 by Chucktshoes

[rugerla1]

Always wanted one of these for no other reason than just to have another plinker. 

[ken_mays]

I received my gauge and my bolt checked out OK.    S&W will send you a bolt gauge for free, but you can make one out of a piece of metal .035" thick or use a small feeler gauge.   If the gauge sits flush to the bolt face, you're good.   If it sits proud of the bolt face, it needs to go back.

[DWARREN123]

It's a bug, as a feature would have a fun switch!

[Jeb48]

Got my gauge from S&W, took a little over a week. Mine checked ok too. If I had seen a spec on the thickness I would have just measured it.