Jump to content

Car tire question, Ford Taurus 215vs225.


vontar

Recommended Posts

Posted

I am wondering if anyone can confirm if this would fit.  We have a Ford Taurus, stock tire size is 215/60R16.  I have a like new set of 225/60R16.  I am wondering if that little bit of different would be 2 much?

been trying to search but short of putting them on the car and checking to see if they rub I have been unable to find an answer for this.

https://www.tacomaworld.com/tirecalc?tires=215-60r16-225-60r16

The car is a 2007 Ford Taurus, SE.   It would save a good amount of money if they will work.   I am fairly certain the back will be no issue,  more concerned about putting them on the front.

 

Posted
Posted (edited)

http://www.1010tires.com/Tools/Tire-Size-Calculator

 

They will fit.  They will be 1.8% bigger. You could also try a 225/55/16. They would be 1.5% smaller. 10mm greater width will be spread on either side, so 5mm wider on a side. That is nominal. Check other trim levels of the same car, or the Mercury/Lincoln variants, odds are good they came with different wheel/tire size combinations, maybe with something in 225 or wider.

 

http://www.1010tires.com/Tools/Tire-Size-Calculator/215-60R16/225-60R16/225-55R16

 

For reference my Toyota came stock with 185/70/13s, I currently run 225/45/17s. I have run a dozen different sizes in the past.

 

Going 10mm wider is not going to be much of an issue at all.

 

 

For disclaimer purposes, my car is HIGHLY modified. This is an extreme circumstance and my suspension/body has been altered from stock specs greatly. It is only mentioned to show that I have a modicum of experience with the topic. However I am not a professional tire guy, take my advice with a grain of salt.

Edited by Murgatroy
  • Like 1
Posted

Thanks, all but putting them on and trying, appears you guys are in the same mindset as myself that they should work.

Like i said I already have the tires from other car and they are already mounted on rims that should be the same bolt pattern  So all that being said this could save me me some money. 

Now just need another one of those mid winter days around 70 to switch some around and check.

Posted

Different wheels could change the whole dynamic. If the offset (back spacing) is changed, your wheels could be farther in or out. Either contacting the strut or fender. Also make sure the wheels are designed for front wheel drive. FWD has a more negative offset than a RWD car. A RWD wheel would almost certainly contact your brake caliper.

Since you have the wheels and tires already, the best advice I have is to just mount them to the car and see how the do. You will want to set it all the way on the ground with weight on it to verify. The camber and caster will be off in the air, as well as the suspension being sprung.

Good luck.

Sent from my SAMSUNG-SM-G920A using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.