Well after long deliberation (with myself) I decided to go with the RRA LAR-15 Fall Special over at Joe Bob's. When I went to order it they were out of stock and I couldn't get it ordered so I started looking again and I ended up getting the a Spikes Tactical Complete Upper and CMMG Complete Lower.
Upper Info:
[TABLE=class: colors_descriptionbox, width: 100%]
[TR]
[TD=width: 100%][TABLE=width: 100%]
[TR]
[TD]Spike's Tactical 16" Midlength LE Upper w/9" BAR Rail (5.56)[/TD]
[/TR]
[/TABLE]
[/TD]
[TD=width: 1][/TD]
[/TR]
[/TABLE]
[TABLE=class: colors_descriptionbox, width: 100%]
[TR]
[TD=width: 1][/TD]
[TD=width: 100%][/TD]
[TD=width: 1][/TD]
[/TR]
[TR]
[TD=width: 1][/TD]
[TD=width: 100%][/TD]
[TD=width: 1][/TD]
[/TR]
[TR]
[TD=width: 1][/TD]
[TD=width: 100%][TABLE=width: 100%]
[TR]
[TD]More Information:
Upper Specs-
-Spike's Tactical M4 flat top upper receiver, Machined from a 7075 T6 Mil-Spec Forging with Mil-Spec Type III Hardcoat Anodized finish, T-markings,Spike's Tactical logo and M4 feed ramps.
-Barrel is 4150 Chromoly Vanadium Alloy, M4 barrel extention, Chrome chamber and bore, 5.56mm Nato chamber, 1:7 Twist, Magnetic particle testing on every barrel, Phosphate finish.
-Government Contour with Mid-length gas system.-Barrel is Phosphate finished under the F marked A2 front sight base.
-Barrel is HP Tested & MP Inspected
-The M16 carriers are Chrome lined with a Mil-Spec phosphate finish.
-The Full Auto M16 bolt is shot peened, HP Tested, & MP Inspected
-Forged Mil-Spec carrier key, Chrome lined, attached with Grade 8 hardware and Properly staked.
-MP tested bolt, Each extractor is fitted with a Mil-Spec black insert and Mil-Spec Viton o-ring.
-Spike's Tactical 9" BAR Rail System.
-A2 Flash Hider.
-Each upper also comes with an ST-T2 buffer.
This Upper comes with the fallowing options
*ST5BG01; BCG (5.56) Spikes Tactical M16 w/MP Tested Bolt
*SAFH510; Flash Hider 5.56
*STU5035-BF; Base Upper - (5.56) 16" Mid-Length LE w/Ft Sight Post
*SAR1109; Rail - Spike's LW Bar 9"
[/TD]
[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]
Lower Info:
Semi-auto MOD4SA lower receiver. Our lower receivers feature Mil-Spec, .250 diameter take-down pins and .154 diameter fire control pins. The forged aircraft grade 7075 T6 aluminum lower is hard coat anodized to Mil-Spec, it is also Teflon coated for added durability and color consistency. All internals are semi-auto, Mil-Spec. Receivers are RDIAS/RLL compatible. This receiver comes with all of the lower parts, front take-down pin, fire control group, semi-auto selector, trigger guard, pistol grip, magazine catch/release and 6 position carbine buttstock installed.
I have 3 Pmags and Daniel Defense A1.5 Rear Sight on the way that should arrive tomorrow. I'm hoping to go to the gun show this weekend, get some ammo then head out to the range. So now what you really care about...