East_TN_Patriot

I wouldn't do it personally, but if you did it and wanted to replace the sight, it's not too terribly hard to replace. If memory serves me correctly, all you would have to do is remove the screws on the receiver of the Sub, take the halves apart, and that rear sight just fits into a hole on each half. I can't imagine a replacement sight would all that expensive. I just figure that accuracy is limited on those as it is and wouldn't see any real benefit to cutting the rear sight. However, if it works for you, why not? People have done all sorts of mods to those things. I even replaced the factory trigger with an aftermarket aluminum one I found on eBay (reinstalling that trigger spring is a real treat).

Yes, yes, and yes. I also prefer 7/8 ounce full-grain veg tan for most holsters, but will use 9/10 oz for bigger guns and 4/5 for small pocket size guns. I typically order mine in sides and get them per-dyed, but I go through a lot of leather in a year. Double shoulders (or single shoulders) tend to be the most uniform in thickness and are generally the most clear of marks an blemishes. Tandy's stuff is hit or miss, so I agree to go look in person if possible. Look at the flesh side as well because it can tell you more about the hide than the smooth grain side. You want it to have an overall firm temper and even look to it. You'll never find one that is absolutely perfect, but some are much better than others for the same price. If veg tan leather feels really soft and spongy, most likely it's a poor quality hide and it won't mold properly. Look at a few different ones and you'll start to get a sense of what I am talking about. They do have a remnant bin, but typically it is the scrap that is not very useful for making nice larger items like holsters. They used to sell leather by the square foot and would cut down larger pieces if you only wanted a small piece. You can also save money by looking at lower grade pieces if you can work around any holes, blemishes, or spongy areas.

I have only used the front sight assembly, but from the posts I have read on KTOG, the folks really like that quad rail. It's pricey, but it's allegedly very durable and from the quality of the front sight I got from RLP, I have no doubt that the rail would be any different. They are commonly on backorder, so that should tell you something as well.

If it was a "farmer's bundle" most likely it is chrome tanned latigo leather. What you need is vegetable tanned full-grain leather. I agree with gregintenn on using saddle stitching. I used that method exclusively until my little business got busy enough to justify buying a machine. Even though the machine makes things a lot easier, a saddle stitch is a better way to go than a lockstitch. Also, I use a Dremel tool with a sanding drum attachment to do the edges. Then you can dampen the edges with water, buff them with some canvas or denim, and then coat them with edge paint. If you think you'll do very many of these, go ahead and drop the money on a basic leather crafting kit from Tandy: http://www.tandyleatherfactory.com/en-usd/home/55510-00.aspx Here's a holster and mag carrier I made for my Walther PPS.

I guess it was the overly dramatic music and constant pictures of the guy racking the slide and tugging up his pants...

WATE, the ABC affiliate in Knoxville, is airing a segment on concealed carry tonight. Based on the teaser, I'm not holding out much hope for the objectivity of the piece. https://www.facebook.com/photo.php?v=3805228734442

I never felt like the Sub2K was delicate. Yes, the front sight is a bit cheap looking. That's probably the only real problem with them IMHO. That said, Kel Tec has a great warranty and great customer service so if you do booger anything up on it, they will make it right. Red Lion Precision still makes a steel front sight assembly for the Sub. I installed one on the last one I owned. To install it, you must remove the factory sight. This process makes you appreciate how durable the polymer plastic is on the front sight. Removing it is a surprisingly frustrating and time consuming process. I have also heard of people replacing the KT factory sight with a front sight assembly from the Hi Point carbine. If - likely when - I get another Sub, I'll just stick with the factory front sight. It's plenty durable for the weapon's intended purpose. I suspect the biggest issue related to accuracy is that the carbine doesn't lend itself to getting a good solid shooting position or cheek weld. It does take a bit of contortioning to get a good sight picture. It also has a pretty limited sight radius, which doesn't help things. One other downer with the Sub is that it has a pretty sharp recoil to it since it is a straight blowback action with little to absorb the recoil from the bolt. Tactacool sells a recoil buffer that helps, but it prevents you from locking the bolt to the rear.

I've had 3 of them. I get one, sell it, get another, sell it... you get the point. I will probably get another one as soon as I find one in 9mm for the Sig/Beretta/S&W. They are neat little pistol caliber carbines. Are they "worth it?" That depends on what you want it for. If you think it will take the place of a rifle caliber carbine, then no, it's not worth it. If you have a Glock in the same caliber and would like a compact carbine that will share mags and ammo, and give you a little more accuracy and muzzle velocity for plinking or close-range self-defense, then you can't beat these for the money. There are plenty of inexpensive mods you can do if you are so inclined.

I think that may be incorrect. I was looking at one of those a few months ago and recall seeing the spare barrels being sold through Rossi's website.

I say 3 minimum, but now try to get 5 minimum. I got into the habit of 3 mags since that was what I carried as a cop (1 in the pistol and 2 on my belt). Now I like to have 5 or more because it makes it a lot easier on the firing range. Honestly, it really depends on the gun and what role it plays in my gun collection along with the cost of the spare mags.

I'd go with a Ruger MK II or MK III. Best rimfire pistol out there at the price. If you prefer a revolver, you could look at a Ruger Bearcat or Single Six. My nephew shoots a Walther P22 that his dad got for him and they both like shooting it. I don't have any experience with the SR22, but if Ruger makes it, it's likely a good gun. If you look for a rifle, just get the Ruger 10/22 and be done with it. Best value going out there if you ask me and there are plenty of aftermarket parts available.

Here is another link that may be of help: http://findarticles.com/p/articles/mi_m0BQY/is_1_55/ai_n31006408/?tag=content;col1 Classic Arms has some Steyr M95 rifles for $109 - $119. http://www.classicfirearms.co/firearms.htm

I wouldn't have any problem with a P99. I actually contemplated getting one a few months back, but ended up getting a P226 instead because I carried a Sig when I was a LEO. I have a Walther PPS, and it's probably the nicest handgun I own as far as fit & finish go. I have also switched to 9mm for almost all of my carry guns. Based on my research, the 9mm is every bit as effective as the .40, which was the round I was issued and carried for years. It's generally cheaper, easier to shoot, and you get better capacity with the 9mm over the .40.

Best I can tell, and I'm no expert, it looks like a version of the Steyr Model 95. I saw one on Guns America listed for $250, but I'm sure these are like other rifles. Some are worth more, some less depending on the exact specs. Here is a link I found that may help: http://www.carbinesforcollectors.com/m95.htm

I don't believe it. I think you created this with Photoshop or something.

It's comments like that, which fuel the claims of racism from others. What a classy stereotype to throw around.

This. What if there had been a child or even the victim standing on the other side of that door?

:panic:

Is there any way to tell specifically who had their information compromised?

And arrested for it seems. Common sense isn't so common, even in people we entrust with our freedom and law.

Not just the neighbors, but what the heck was the deputy thinking when he arrested that innocent couple?!?

I don't use that, but I agree with Mike.357. I'd contact them and let them know. Hopefully they will stand behind their product.

I'd never heard that rumor, but that video pretty much takes care of it.

According to this article from North Carolina State University: So as long as your aim is good with that pink bat, the females won't have time to get all upset. For the rest of the info: http://www.ces.ncsu.edu/depts/ent/notes/Urban/carpenterbees.htm

You can get a nice SKS for around that price. If you prefer a bolt action, look for an Ishapore in 7.62 NATO. Or you can get a Mosin for around $100 and buy a bunch of ammo. The K31 rifles are nice, but the ammo is a little more pricey and harder to find that the 7.62x39, 7.62x54R or the 7.62 NATO.