gunrunner32

Range and membership prices seem a little steep. Might browse the retail section, but doubt I'll be in it for the range. I'm sure it's nice and has that new range smell, I stick with fighting off the ticks and shoot the fields around the shop.

Buying ammo for it is between .75-.90 cents a round. I've got a Enfield No 2 Mark 4 made somewhere around 1943, it's a blast to shoot, a little rough on the shoulder though and by far the heaviest rifle that I own.

You can give me a ring, I've got a small one in the garage. I'll toss it in for you and get it all done up. I'm just down the road from the Sango Walmart. We could do it Sunday morning, Saturday is my daughter's birthday, and it's back to work Sunday afternoon.

Certain finishes don't allow for items with tight tolerances to be done. I would have liked to do everything but the cylinder and grips on the revolver, but I felt it better to have a functioning pistol at the end of the day. Most of these pistols, all I can say is...different strokes. If you open my gun safe there isn't too much out of the ordinary in there...yet, I'll be getting one and that will probably be the only one.

Glad to hear they liked it, I wanted to show the pictures of my daughters bike that I tried to complete today, that will have to come in an update. There are several other that need to be reassembled and I'll post pictures of them up here in a future show and tell project postings. Little teaser for you guys, there will be a chrome and black chrome 10/22 coming, just need more time in a day...or no wife nagging me.

I've been on vacation from my day job for the last few weeks and outside of my "honey-do" list I've been plugging away at some of my own projects and I thought I would share. Don't be too alarmed by some of the following, you may not want to be drinking anything before you start to scroll down. Kimber Tactical Pro II Before Picture: Kimber Tactical Pro II After Picture, refinished in an OD Green to pick up some of the color in the grips: Another Kimber done in Satin Aluminum and Blue Titanium, those aren't the grips that were staying on: Mossberg 590 that was done in an OD Green: Ruger LCP before: Ruger LCP after with a MagPul Flat Dark Earth slide: Last, but not least, put down your drinks and hide your children's eyes... S&W 442 Airweight Before picture: and...... after...... done in a "highlighter" green, actually shocker yellow with a chrome base. Hope everyone enjoys, and let the laughs come....

I second Green Mountain. I'll be picking up 2 more once my 1911 project is completed. I've got 1 with a 20" 1:16" twist bull stainless barrel and it is accurate as I can get it, I'm sure some better glass would help. The other with an aftermarket barrel has a Rimfire Technologies barrel and it's nice and light and stacks the rounds, but a little more pricey than I'd spend...

I watched all the first season. I would like to see the second season, but for an extra $15 a month on direct tv, I'll just save my money and buy the second season later.

I'd leave it alone....it's cute...HAHA, I kno't know who thought this was a good idea, but someone did. If I were you I would look for the all black Talo edition (http://www.galleryofguns.com/genie/Default.aspx?item=150781&mfg=Smith+%26+Wesson&mdl=M%26P&cat=All&type=All&cal=22LR&fin=&sit=&zipcode=37043) Buds may have one or at a minimum check gunbroker and throw that one on armslist. I would go Cerakote over Duracoat, I've messed around with both and find Cerakote more durable and the cure time is significantly shorter.

Well according to MCSC (http://www.shoottn.org/Calendar/calendar.php) every weekend in April they are open for rifle and pistol when the RSO is present. Just don't try to shoot a Ranch Hand/Mares Leg on the pistol range...I got yelled at last time I did.

For a little while in 2010 there was a gathering at Owl Hollow. It was a bit of a drive, but it was a good time. I would like to see something like that again. I would be down either at OH or MCSC. It'd be a good excuse for my wife to go shooting again and drag my daughter along for a little .22 fun.

^^I'd go with this one, but then again I'm kinda partial to giving work to Brandon.

I saw the commercially produced ones and thought, why buy what can be made for less. My first 2 were done for $7.42 for all the supplies, Brownells sells 2 for $8 and another $6 shipping. It is all rubber coated and the ends have been rounded so I doubt it will do anything to the barrel of any of the pistols.

Well we can get the wife's together to run them through a fun day of torture. I've got a few my wife hates to fire or flat out refuses to fire. Mainly my 454 lever, my steel skeleton stocked AK and my Enfield in 303 British and she's a little weird about shotguns, she loves to shoot the Mossy Tac Cruiser, the 535 and the coach gun but won't touch the Winchester 97, all being 12 ga. Still though I'm glad she has taken an interest in shooting, and it's good to see that there are other wives that are joining their husbands at the range.

^^This, I was going to suggest this place but was beaten to it. I have handled a few from them and they all seem to turn out good.

That's some good shooting. My wife will only shoot my AR's and the .22's. Her favorite is (now hers) a 10/22 scoped w/ bull barrel, but I've got 4 so I can share.

Dehumidifier works good as far as I can tell. I've only had the safe for about a month now. I've been looking for something to keep the safe neat and clean and easy to access. I'm picking up the rest of my guns from my parents at Easter and getting a few back from MCC soon as well, so there will be more pistols cluttering up that shelf so I can only figure on making more of them and getting another pistol rack.

I've been looking at the pistol hangers that slide on a safe shelf and hold the pistol by the barrel. Well I had some scrap steel rod laying around and started bending until I got the shape down and had tension on everything to hold the pistols and then rounded the rods ends and wrapped everything with wire shrink wrap. My first 2 were just guesses about length, but I found some pistols that would work in them. Here's some of the pictures: The most difficult one was making the bends for a reverse hold that I had to do with the Ranch Hand, I also had to make a small hook to hold the back end, it was just too much for the 3/16" rod. The .454 Super Red Hawk is a bit too heavy too. All the hangers were made of 3/16" steel rod, I think either 12 or 14 gauge and covered in black shrink wrap. I bought 3 rods and went through about 5 small packs of shrink wrap all of which cost about $25. Pretty cheap and I still have enough left over for about 1 or 2 more hooks.

I sent the property manager an email a bit ago addressing my issues with what's been going on around here. The property is supposed to be maintenance free, that's why my wife picked out this place. I'm only usually home about 4 months total a year, so having something easy to take care of it nice with her in school full time and a 3 year old. I know I was going to end up screwing myself on certain things by getting into an area with a HOA, but they seem to be everywhere anymore. My next house will be in the middle of nowhere, outside any city limits, no HOA and my wife can come live there if she wants.

Anyone else have to deal with these clowns? When we moved into our neighborhood we were told we have a home owners association with a monthly fee, fair enough especially with what they were supposed to offer. My wife and I were told that they take care of the outside of the buildings. The siding, roof, landscaping, the pool, clubhouse and playground. Well since moving here 3 years ago the fee has went from $95 to $110 thanks to the jokers in GA taking over the contract. The yards are anything but maintained. Up until this past Monday the grass out front was about 6+ inches long. The shrubbery out front hasn't seen any kind of clippers last summer...when I was home to take care of them. The mulch in the landscaping hasn't been changed/redone in about 2 years. We've had about 4 different lawn care companies in the last 3 years and each one seems to do less and less and a more horrible job than the last. We were told that the shrubbery was on us to maintain as well as the mulch. The finish they have on the front door is faded, the front of the house faces east. We asked what needs to happen to get it refinished, we were told that it was on us, but it needs to look like the rest of the neighborhood, but still no answer on how to make the metal door with wood texture look like wood. The deck has been on the second floor of the house since 2007 and it hasn't been treated at all. When asked who we need to contact for repairs we were told it was on us to do it since it was on the second floor. Fine by me, but I can't replace the deck with engineered wood because it would look different than the rest. Another thing, some of the planks of the deck are also part of the deck in the adjacent town homes with a privacy fence separating the 2. We were told that we had to coordinate with our neighbors if those boards needed to be repaired. After a year and a half of having the Dish satellite, we get a notice today that since it is attached to the deck railing, like so many others in the neighborhood, it needs to be removed because the railing is there for protection from falling and to add property value. So we are being told to have it moved...nothing saying where it needs to be moved to though. With all the stuff that is not being repaired or maintained that is supposed to be taken care of, I'm tempted to send them a bill for the cost of a pressure washer rental, the sealer, my hedge trimmer, the mulch, whatever it is going to take to refinish the door and the cost to move the dish instead of a check for the HOA fees. I remember Dad doing that when we rented an apartment as a kid, he would send the receipt for repairs to the owner with the difference for the rent, it always worked. Anyhow enough ramblings, I'm just tired of dealing with this overpriced BS here and wondered if anyone is getting raped by these HOA clowns.

Looks like I talked the wife into allowing me to go...she gets to go shopping though...so it looks like I will just be window shopping.

That must be the Joanne Fabrics edition. I think I'd be checking my pants for holes if my pistol was eating up that much fabric.

I wouldn't wish a 1/16th inch digital pattern on anyone after doing that one. I think there was a good 25 hours if not more into the frame alone. For a rifle I would go 1/4 inch +/- 1/8th inch. I still like the pattern, or lack there of, that the sponge has. I may have to try that with the media I use, I'll be practicing the "marble" pattern I previously brought up on my daughters bike. It's a green and blue hotwheels bike, she wants pink and purple, what she wants she gets....most of the time, I still don't have any pink guns.

Alloy guitar, digital stuff is a pain. If y want to do it right you have to make all your lines straight along the same axis. I have a few that are done, here is some digital and stenciled patterns for you to learn from: XD in digi multicam Rem700 in multicam

Working on getting the maker. It's the little brother of a friend at work. I've sent texts to him, still waiting on something back. I'll find out tomorrow at work. Sorry I came to the table with nothing more than a picture.