mikegideon

  Now you're just funnin' me :)

  I'll keep doing it. Last one didn't line up, but didn't take much to push it in.

The good news... he's cooking his own goose, and taking a bunch of his libtard friends along for the ride. His ego is letting him make a huge mistake with the gun control tirade. The polls don't support it, but he keeps going. Let him say all the stupid #### he can muster. If there's ever gonna be another purge like '94, he's doing exactly what I want him to do.   BTW... there's no question in the minds of my 400+ facebook friends where I stand, and a whole lot of them are Libs. 

Here ya go. Probably warehoused in Chat. No need to drive anywhere...   http://www.amazon.com/Zilla-11442-Ground-English-5-Quart/dp/B001OVGPH6

I'm not so sure Obama knows what he is. Seems to me, it's one of the many things he just can't get his arms around.

  Petco has Lizzard Litter. So does Petsmart.   http://www.petsmart.com/product/index.jsp?productId=2752164

I'm pretty sure Dolomite can make the best polishing compound from the pancreas of an East Tennessee box turtle :). I've been through the Nu Finish/dryer sheets thing.   Put some Lizard Litter and some Flitz in the tumbler, add some brass, and tumble the shit out of it. Comes out looking new. And, I can't find a dust problem. There IS a fine layer of dust on the brass when it comes out of the media separator, so I always dump it onto a towel and just rub down the pile a little.   Flitz is only expensive if you don't count your time.

  It's funny. I dug up the lapping trick because of all the vein poppers, and the fact that one came out right for a change. One complete notch is only 3 thousanths. So, you probably only need to take off a thousanth to bring one in. We're talking a couple of light passes over a piece of fine grit sandpaper on a flat surface. They also make barrel nut shims, but who has those? Here...   http://www.ar15barrels.com/data/barrel-nut-index.pdf   BTW... The reason I called Dolomite was because of the technique I found while looking this stuff up. Torque the barrel nut to 30, and then break it loose and do it again. Go for your final torque after you bring it to 30 the third time. I did that, and it came it came out dead nuts at 30. I thought I may have found the grail. The next one took more.

  Why not? How many times have you seen three lawyer bashing threads pop up in the same day? AFIK, we have a lot of cops on TGO, especially if you count the large lurker crowd. Macgyver isn't trying to create a protected class. He's trying to fix a problem. I'm pretty sure he would do the same if it was happening to any one of your examples. It's pretty easy to bash any one of them.

  Well... there IS a spec. And, you ain't the first guy to say, "it's out of spec, but works fine". :)  I had one come up dead nuts on 30 a couple weeks ago. I called Dolomite on that one too, because mine normally wind up closer to the top end (vein popping torque). The proper thing to do, if it falls out of spec, is to lap the front of the receiver. Because of the fine threads, it only takes a little... less than the thickness of the finish on the receiver.   I always use a torque wrench. Shooting fine ain't the test. If the nut comes loose, it will take a long time to show a problem. Same deal if it's too tight.

...

Best answer from arfcom...   It's "The Sound of Freedom©".  This. Learn to love the sound.

  Get you a fork and keep it by the tumbler. It's going to make clumps, especially on the first dose. I run the tumbler and break up some of the clumps, then let it run some more before I add brass. You'll be real happy with the results.

  I think you have your answer... this one :)

[media] http://www.youtube.com/watch?v=R7cRsfW0Jv8 [/media]

  Oh no  :eek:

  This. Haven't gone that far in my research, but did get this far. If it doesn't take PMAGs, keep walkin'.

  Bull! If I get the clap, I can get free shots :). I guess you want me giving the clap to all my baby mamas. You're a cruel bastard  :rofl:

  Yes, I'm getting that old :). 15 pages, and it still didn't sink in for some. I'll carry there until they post. It won't bother them, either. The message wasn't pointed at you or me.

  Yes! Show up without the intimidating props, spend a few bucks, and thank them for going so easy on the mentally challenged members of our flock.

  Probably no immediate gratification. As the Obamacare thing continues to fester, and it will, it will have some significance. The law is crap, and I think a majority will eventually realize that. When they do, it's gonna paint a big target on the senate majority. 

  I don't know which would be scarier, an AR-15, or a big hairy jarhead in a dress  :rofl:

  Don't worry. This isn't going to create a shortage :)

I have been wondering about this myself. I use Chrome. Forcing it with the media tags will work for me.   [media] http://www.youtube.com/watch?v=0OnpkDWbeJs [/media]

  Did you even read those 15 pages? This isn't about a coffee shop. This is about Voldemort disease, and the fact that we are being damaged by those retards. It's like the misspelled Tea Party signs. Some folks are just gonna believe that ALL Tea Partiers are illiterate.    I'm not stupid enough to carry an AR-15 in public, at least not until it's absolutely necessary. But, I'm being viewed as that kind of idiot because it has become the face of gun ownership in the media. I'm sick of it.    It's reasonable to think... If a group picks a bunch of idiots to represent them, THEY must be idiots too. The Voldemorts of the world don't represent me, and going forward, I'm gonna make damn sure everybody knows it.   EDIT: And BTW, this is not about daily open carry either. That's a separate debate that we've had a gazillion times.