Krull

Actually he could have done the lettering but i asked it to be all black ---for a gun made in 2000 it was not beat up at all had some very minor wear on it but this finish is actually stronger than their hostile environment finish. This is a Variant 3 so there is no safety so to speak or white line. I have the detent plate which takes about 2 minutes to change it over to a varient 1 which is what my USP 40 is so it can be carried cocked and locked. However having this gun in double action half cocked to me is better than cocked and locked so no safety to fumble with and the trigger pull at half cock is around 6 lbs. After that shot it goes to single action of course. I do have a couple of pic before but it doesnt tell much about the gun -- lighting was bad This was only a slide refinish-- he has my USP 40 now which im having the slde and takedown lever done in house black again and having the barrel done in with their plating service -- i will post pics when i get it back -- im more excited about that one than this one Only before pics i have as you can see gun only had very minor holster wear before -- [url=http://s235.photobucket.com/user/Morlais/media/Attachment-1_zpsdca9b6a1.jpg.html][/URL] [url=http://s235.photobucket.com/user/Morlais/media/photo_zps4bc0ca8c.jpg.html][/URL]

Mine shot anything out of the box -- FMJ JHP didnt matter -- only 1911 i have ever owned that shot ANY ammo I shoved down its throat.

Picture speaks a thousand words.

I make sure I have my tactical drop down holster when I carry my HK 45 with my surefire x300. I always wear my generic Swat shirt and tiger striped pants. Then I top it off with my ultra cool conceal carry badge. Noone says anything to me. But I think the key is wearing your baseball cap backwards while following the steps above.

I met Tom in Arkansas a few moons ago -- such a great guy ....... 

Why are thy buying 1.6 billion rounds if they have over run. Heh. Nice deal too bad I have no 40's anymore.

Go through an FFL Basically your taking a chance every time you buy a gun from a stranger. Deal with reputable people but there is always still a chance. You don't know how many times that firearm has changed hands. There is no car fax for guns if that is what you mean. Even a FFL can only tell you of the gun was REPORTED stolen. Doesn't mean it won't be 4 months from now. At least it's not you in hot water if the gun was already reported stolen or is reported stolen down the road. You will more than likely be out the money though if you buy it and its reported stolen later. Mr po po will be paying you a visit.

I have a troy built i bought two years ago -- not a single hiccup -- starts on the third pull every time -- guess its hit or miss.  before that i had a weed eater brand i bought at walmart i gave away when i moved to arkansas -- it worked fine for 8 years not a hiccup. 

    38 special good luck.... If you stalk the colonial heights walmart and i mean you have to get there @ 1700 for the truck and wait you can score 9mm pretty regularly.....100 round boxes but its a hit and miss waiting game

I cant help it -- everything i have has to be in "like new" condition -- carry or not ..........minus family heirlooms.  Its like that noise in my Jeep -- it drives me nutz.

    If you decide to use them (which you cant go wrong i promise) make sure you set up an appt -- prepay and then send your gun in when they tell you to. Turnaround time is much better then just sending it in.  usually will have it back in a week or two if you do it that way---   you can look them up they do work for a lot of people across the country and their work is second to none......their communication is a bit slow but its only the two of them. 

I lost one of my 2 GSD's last month -- the thing that sucks about dogs is you love them more than humans and when they die it sucks twice as bad RIP in Burton [URL=http://s235.photobucket.com/user/Morlais/media/b54edf54.jpg.html][/URL]

        i guess the question is better asked with the heat of the pan to "melt" any of the frame if it touches it -- i know boiling wont melt it -- i should have rephrased the question

    HK USP .45 frame

Call ccr in Greenville. Brad and Mary do great work.

And I take it everything turned out fine ?

Going to try something this week and wanted some input..  Going to use the rit dye method to dye a polymer handgun black ...   Now my question is i see advice from 150-190 degrees to boil the polymer in a pan for a few hours --- how hot is too hot to make sure I dont screw the polymer up?   I would think 190 wouldnt even come close to messing up say a glock but just wanted to check and see if there any "experts" here to chime in?     Thanks again       of course the "lower" so to speak will be stripped free of all metals

Well I traded for it. Will get it out to the range tomorrow or Sunday. Love the way it feels already.

Im thinking very seriously about trading into one of these pistols tonight...... howeverI own MP's Glocks and was wandering about the reliabilty of the XDm's ---   Can I expect the same Glock type reliability...???   thanks in advance

    What do i need to ask from him to make sure ?

Lives in NC -- FFL or no?   Thanks again OS im sure you will answer .....   :)

Ok thanks OS!

is this legal?   thanks

    Makes you wonder with todays society if you had taken one of his classes and was involved in a self defense shooting if it would be held against you when the prosecutor shows one of his You Tube videos or pulls out an old newspaper clipping at your trial....

    Not contradicting this at all.............just stating i would rather take stick to Pat Goodale and Pat Rogers classes because i have that option (which thankfully i have a inside track on).... these guys are proven and you wont see any rumors about either one of them "running" in the face of danger....   If Yeager was closer to me and i didnt have access to these two cats I would consider it --- however I know these two guys personally, and they are the real deal.  Hell google Rogers he is a hoot.... but dont let his lighter side fool you ..... he is a bad ass.. <<<<This vid has some explicit language>>>> http://youtu.be/HvQJtqv5ZFs