bigwakes

http://www.midwayusa.com/product/935590/hornady-custom-grade-new-dimension-2-die-set-300-aac-blackout-300-whisper?cm_vc=OBv1938614   Hornady dies in stock at Midway.

 I guess I should have asked you before I placed my order.   Got one you reccomend for subs?

 http://www.midwayusa.com/product/938614/lee-2-cavity-bullet-mold-tl309-230-5r-30-caliber-309-diameter-230-grain-300-aac-blackout-tumble-lube-5-ogive-radius?cm_cat=CheckoutConfirm&cm_pla=ProductDescrip  

$26.39 plus shipping with coupon code 61458489

I saw a guy on YouTube put an aquarium bubble maker on the powder to constantly vibrate the powder while reloading.

Does Dillon make the baffle or another company?

That's too bad since I just got ahold of an 8 pound jug of aa1680. I have a few pounds of H110 to experiment with, but will start looking for Lilgun. I have a YHM Phantom QD 7.62 and definitely want to get them as quiet as possible. That's a good idea to load to the 16" and then chrono in the ar. I have a CMMG and a PSA 16" ARs in 300 as well. I doubt they will cycle subs with these bullets though. I have been looking at casting in the near future and just started the paperwork for a Liberty Mystic to shoot cast subs.

Will give that a try. I bought it new about 8 months ago, but have just now gotten a chronograph to figure out why some of my subsonics run super sonic. I have only loaded about 300 rounds on it since I had a move across the state in those 8 months.

Need some help with my powder load issues. I'm loading 300 blackout 175 grain pulled bullets from David. The bullets weigh consistently 174-176 grains. I'm loading them as subsonic Plinkers trying to hit 1000 fps in my 9" AR so it will stay subsonic in my 16" Remington 700. The issue is I chrono'd about 40 rounds and they were 960-1050 with one as high as 1500 and one as low as 750 with 10.8 grains of AA1680. One thing I'm going to do this week is cut the bearing spring for the auto indexing wheel to stop the indexing jump. I have noticed losing powder because of it. That doesn't explain the flier at 1500 fps. I only had one, but seems that a 100fps swing for the average would be a little much. I have been reloading in small batches so I have not filled up the powder measure more then a couple inches of powder. Could that be causing inconsistent powder measurements? I do have some inconsistencies in the powder measure when testing random rounds. Could be as much as .2 grains off with a Hornady digital powder scale. Any words of wisdom? I'm using the AK powder funnel.

I took it once last year for white tail, but didn't get a shot. Take a look at all the hog hunters already using it though. http://m.youtube.com/results?q=300%20blackout%20hog I did put it on a buddies full auto m16 lower though with amazing results. http://m.youtube.com/watch?v=PrE0_jnv4c0

The best by far in my collection is a 9" AR pistol chambered in 300 blackout. It throws upto a 240 grain projectile 1050 fps and hits like a mule at 50-60 yards or will throw a 125 gr bullet 2200 fps with 1360 foot pounds of energy. It's everything you could ask for in one package. Add a suppressor and every other gun becomes a safe queen.

And the same people who are against the death penalty for the most vile criminals on the planet campaign to kill the most innocent form of life on the planet. Just seems like a real twisted moral compass.

Forgot to mention I have a bunch of nut sacks I can sell for super cheap. Military surplus. Pm me if your interested.

A lady at my HCP class in 2000 could not hold the rented revolver up long enough to squeeze 2 rounds in a row. She failed her first target with a rented .38. The instructor held his hand up so she could rest the gun on it for her second try. She passed. She was 70 or 75 and was a victim of a recent assault, so I think the instructors wanted her to pass at all cost. Plus I think they were advertising dont pass/ don't pay.

I'm not saying they didn't make a mistake, that's just how they handled it. I checked the application and it does say "duplicate." So, I'm thinking you are correct. We should have kept the old one and waited on the new one. The crazy thing is we went on separate days to the same place and they made the same mistake. I'm thinking some training is in order.

They gave us the yellow paper that says we can carry with a photo id and the receipt.

Safety? Safety? We don't need no stinking safety! (In my best Blazing Saddles impression)

Yes, we both applied for a duplicate, but they took our permits with the wrong address. I called the local DMV and they are looking into it.

Never had a single hiccup. He does have the steel feed plate. Did you send your lower to Shrike for a custom fit?

Looking at the yellow form and no number listed. anybody know who to call?

I went to my local dmv for an address change Jan 29th, wife went two days later. Still nothing on either one. Guess I should call somebody.

Liberty said they would ship the can around September. I found one in stock at http://silencershop.com/ for $140 off msrp. I already have my serial number, just waiting on a transfer to my dealer to start the form 4.

Already out. http://www.silencershop.com/shop/YHM-3300A-TI I didn't want to wait 12 months on production and took what was in stock. Just ordered http://www.silencershop.com/shop/liberty-mystic to lighten it up for an SBR and takes apart for lead bullets.

I predict everyone who participates will have their firearm confiscated. And there will be at least one negligent discharge most likely from someone sent there by CNN to hold a racist sign or do something that they can focus on besides the second amendment.

I have the 9" AAC upper. It eats everything I feed it including some 175gr subsonics that most folks seem to have feed issues with. I have a YHM Stainless 7.62 Phantom suppressor and it works well. The can is 28 ounces and is tough to hold for long on any of my 16" Blackout guns.