JeffL

9" 300 Blackout AR SBR.

  Oh... my wild guess was $2500 to $3000. That's ridiculous.

I know it's silly in semi-auto, but I want that M249s.

  I get complaints about the smell just from making a 4L yeast starter in the kitchen.

Always keep FermCap handy. A drop or two will prevent an impending over boil and huge mess. Sent from my SAMSUNG-SM-G900A using Tapatalk

I started making 5 gallon all grain batches about two years ago. I've upgraded to a 15 gallon boil pot making 10 gallon batches. All my beer has been made on a propane burner on the back porch.   My 10 gallon Igloo mash tun is almost not enough for my usual IPA, will have to adjust mashing procedure if I want to make 10 gallons of Imperial Stout for the fall/winter.   I already had a kegerator so I jumped right in and have kegged all my batches. I got a small chest freezer from a fellow TGO member after a couple of batches. I've got it hooked up to an STC-1000 temperature controller with a paint can light bulb heater. No problems maintaining fermentation temperatures year round in the garage. Temperature control is one of the best things you can do to improve the quality of your beer.   I'm a bit busy for the next few weeks; however I'm due for a brew day. You're welcome to come over and observe if you'd like.

I don't think Glock even makes guns chambered in .45 GAP anymore. You can probably find a used one cheap, but you'd better buy all the ammo you can. I wouldn't buy it.

  Ban state mod to change multi-position to a fixed stock.

If you can find a tap small enough you can thread the roll pin and pull it out with a screw.

I like http://www.imgur.com myself.

Want!

  You're not wrong. I knew better and was still shocked.

I load 10mm with 800X. I didn't like Unique for my .45 loads, never tried with 10mm.

Try actually going into FGS if you want to see some high prices. They were packed the one time I wandered in so I guess they've got the clientele for it. $25+$10 TICS is what I usually pay at Guns & Leather, and that's only if I want something they don't have in stock. Their prices are pretty reasonable.

People can't drive for shit. As a motorcyclist I welcome self driving cars.

My shed, East Nashville. Bring craft beer.

We had just eaten at Mitchell's. I've got the SSA-E in my 5.56 Bushmaster. Need one for the 300 Blackout too.

The SSA-E is a lovely trigger.

You don't need to use GPT unless you've got a boot drive that is over 2TB. There's no reason not to use GPT if you can, though. Make sure you're choosing UEFI boot when you boot to the Windows 7 CD, otherwise you won't be able to set it up as GPT.   If all else fails, run recovery tools from the Windows 7 CD. Open an command prompt, type in diskpart and hit enter.   Then -> select disk 0 > clean   This will remove all partition info and data from the disk. Reboot to the Windows CD and do your install from there.   FWIW Windows 10 is good and you should upgrade to that.

  I'll load it up at work when they get RSAT working. We had to fight tooth and nail to upgrade to Windows 7 at the last minute, doubt we'll be rolling out 10 anytime soon.

My 8.1 VM gave me the "Something Happened" error, my Windows 7 desktop threw back 0xc1900101. Good times.

  That seems to be the going rate for Gen 4s. They do come with 3 mags, so that helps.

That would make my ride to work a lot more interesting!

  Buy a Motorola SurfBoard 6141.

60gr Hornady TAP.