MacGyver

I really like the BAD lever. It does take a couple of steps out of the manual of arms, and makes some movements much more efficient in my opinion. I run on two weapons, and have had zero problems with it affecting the bolt hold-open feature. It's really just bolting onto, and extending the bolt realease. It doesn't require you to keep you finger in the trigger guard. It extends outside the guard, where the manipulation of the lever is performed.

Rock on! That makes my afternoon. Don't even know you personally, but I know the weight that having him in Florida and all the custody stuff has put on you. Congratulations.

I'm glad I'm not the only one. I wonder why his byline never lists his status as Enron's favorite financial consultant?

What a great day! Looks like fun was had by all.

You two are making me jealous! Congrats Nate...I was pulling for you to have a good turn of events (not that 40 gallons of hot water missing your kid good enough)

Nice. I see a TGO barbecue in our future. I'll bring desert.

Nice rig!

I'll see if I can't find some of the pics from trips in years past. One of the guys we dive with usually has a camera. Here's a general pic. That classic fan shaped sea shell that you always see is usually a scallop. Cleaning scallops isn't hard, just tedious. You turn the shell so that the pale side is up. Then, run a small, blunt knife up under the shell, along the inside top of the shell. This removes the muscle from the top part of the shell, and let's you discard that piece of the shell. From there, you are left with the muscle, surrounded by a bunch of guts. You take the knife and scrape around the other side of the shell and if you do it right, just pull out all the guts with the blade of the knife leaving the scallop alone in the shell. From there, you just scrape along the bottom of the shell to remove the meat. There is another way that we see a lot of people do with a small shop vac. After opening the shells, they just hit the whole thing with the hose of the shop vac. This sucks out all the guts cleanly, and leaves the meat. I've never done it this way, as I don't want to have to clean my shop vac afterwards.

I'm jealous. Let us know how it shoots.

Nice.

I hope you're right.

The engineer in me totally agrees. The impact a year from now should be limited to cleaning up beaches and some local economies. I just think it took some gall and a firm belief in the stupidity of the American public to say that when they did. That said, I find it ironic that some of the scientists claiming they were misquoted didn't learn their lessons after complaining about being misquoted when the administration put the moratorium in place. Fool me once...

If this report came out three months from now, I wouldn't necessarily disagree. And, I certainly agree that a lot of the oil is in a fairly dispersed form. They pumped enough dispersant in there to break up anything petroleum based. I'm suprised it wasn't disolving the gel coat and bottom paint on the boats at the scene. I just think it may have been more appropriate to look in a few more places before making the call - esprecially since it came on the day that they were pumping cement into the first relief well. If I recall the article correctly, they were looking at distances from 2-100km. I saw fishing boats coming in with significant oil fouling on their hulls last weekend over 200 miles away from the rig.

Looks like the "scientists" quoted by the administration are crying foul today: Gulf oil spill: White House accused of spinning report | Environment | The Guardian

Yeah, Roy's in Steinhatchee is pretty good. I'm sure there are a few more accommodations and places to rent a boat if you need to as well. I've just never spent that much time there. Keaton beach really is like stepping back in time

Nice. You're in the home stretch. Be safe. Have fun out there.

Nothing to see here. Get those rigs moving. We've got to drilling to get back to. Wait a minute. Where did the oil go? Really guys? Seriously?

More time on their site. This is an negligent discharge waiting to happen. Steer clear.

I don't want any piece of equipment rendering my pistol unusable when holstered - in this case taking it out of battery. I don't want to chance a malfunctioin clearance if I have to draw that weapon. If you are looking for a holster that will accomodate a light/laser, I'd call Raven Concealment and be done with it. Their PhantomLC is a great holster if you are using a light.

Sent you one back. Feel free to give me a call if you have questions.

I'll post this here because it's where it seems to fit best, since it is "hunting" in a primitive sense, and there is the occasional spear gun involved. With the economy the way it is, and everyone being scared about oil washing up on the Gulf beaches, here is a gem of a vacation, on the cheap that might interest a lot of people on here. For the last 10 years or so, my dad, some friends and I have gone a couple of times a year down to Keaton Beach, Florida (basically right where the panhandle turns south) to go scalloping. Taylor County is one of two counties in the US that have an actual scallop season. Scalloping is pretty simple. This whole area is grass flats - for miles offshore. You use your boat to get out, but the water is so shallow that a john boat is really just as at home as a bigger boat. You get your snorkeling gear on, grab a mesh bag and start looking for scallops, that are generally sitting right on top of the grass. You're never in more than about 6 feet of water, so it's just a leisurely as can be. We tell people who haven't gone with us before that if they get in trouble, to just stand up. The only time you are in more than 10 feet of water is if you specifically search it out. The limit on scallops is 2 gallons per day/per person or 10 gallons per boat in the shell. Our first trip this year - a couple of weeks ago was great. We dove for three days, and limited out within two hours all three days. The rest of the time, we all grabbed gigs or spear guns and went looking for flounder - which conveniently really like to hang out in the grass flats. Keaton Beach is the last bastion of 'cracker Florida'. The best way I can describe it is to say that it is 100 miles and a 100 years from Destin. If you went to Destin in the 70's, this isn't too far off. It is a fishing village through and through. The grass flats mean that there really aren't really any of the white sand beaches like they have further west. If you are going to Keaton Beach, you are going to fish or scallop. Period. The Keaton Beach Marina also runs the motel - which has about 10 rooms around the marina that rent for ~$60/night. Nothing fancy, but they are fine. They'll lift your boat in for you so you don't have to put your trailer in the salt water. Eating is limited to the Hot Dog Stand (which is a full service restaurant run by a family of women down by the pier) or the Gas 'n Go which has snacks and sandwiches. The Hot Dog Stand generally gets our money 2 meals a day, as it's both good food, and cheap. If you are into canoeing or kayaking, there are some great trails in the Big Bend area. There is NOTHING else to do in Keaton Beach if you don't want to drive the 19 miles into Perry. You can occasionally get a cell signal out on the pier if you hold your breath and the weather is just right, but that's part of the appeal. If you go down here for a couple of days, you are really getting away from it all - by force. If you've never had the experience, it is a great time. We have never taken someone with us who hasn't come back in following years. It's a ton of fun to gather the scallops, not quite as much fun to clean them (even though a small shop vac does make it a ton easier), but skewered on the grill wrapped in bacon may just be a little piece of heaven. I'd love to hear anyone else's experiences with this, and if you are looking to get away for a few days without breaking the bank, I highly recommend it.

An acquaintance grabbed my LX2 the other evening and proceeded to look directly at it to see how bright it was. Call it the, "is this expensive light really brighter than my Mag-Lite?" test. I saw what he was about to do, and couldn't quite get the words out fast enough to stop him from experiencing the full 200 Lumen brightness at about 2 feet. I don't think he'll make that mistake twice.

Hey congratulations! What a cool ending to this story.

Great looking rig. Enjoy.

Low refrigerant or clogged expansion valve. Both pretty inexpensive if you get someone who knows what they're doing.