Gunrunner

LIKE NEW 30 rounds fired through it. PART LIST BELOW! The rounds fired were used to adjust the gas block and adjust the JP enterprise silent capture spring buffer which has interchangeable springs based on lbs. and weights that allow you to tune the blowback. My friends and I thought we were going to focus on more range and precision shooting... That never happened LOL. Since then it has collected dust in my safe as I always use my "beater" guns for range days and mag-dumping. It weighs 5.15lbs total, light for the size. Message me if you are interested. I will put the part list below with links to the parts: Lower Receiver: Radian ADAC-15 https://www.radianweapons.com/en/receivers/lower-receiver Upper Receiver: Bootleg Enhanced https://aimsurplus.com/products/bootleg-inc-upper-receiver Barrel: Ballistic Advantage 18" .223 WYLDE SPR FLUTED STAINLESS STEEL RIFLE LENGTH AR 15 BARREL, PREMIUM SERIES https://www.ballisticadvantage.com/18-223-wylde-spr-fluted-stainless-steel-rifle-length-ar-15-barrel-premium-series.html Handguard: MAGNESIUM HYPER-LIGHT M-LOK HANDGUARD AR-15 15inch 6.98ounces https://www.vsevenweaponsystems.com/magnesium-hyper-light-m-lok-handguard-ar15/ Buffer: JP Enterprises Gen 2 Silent Captured Buffer Spring System with 5 Adjustment weighted springs https://www.opticsplanet.com/jp-enterprises-gen-2-silent-captured-buffer-spring-system.html?_iv_code=J5-BUS-JPBSC-JPSCS2-15K Buffer Tube: V Seven 2055 Carbine Buffer Tube CBT2 Color: Black. https://www.opticsplanet.com/v-seven-2055-carbine-buffer-tube.html Primary Weapon Systems Ratchet Lock Castle Nut & Endplate Set https://www.primaryarms.com/primary-weapon-systems-ratchet-lock-castle-nut-endplate-set Stock: BATTLELINK Minimalist Milspec Stock https://missionfirsttactical.com/BMSMIL Grip: Magpul Industries AR Rifles MOE-K2+ Grip https://www.opticsplanet.com/magpul-industries-ar-rifles-moe-k2-grip.html Trigger: HIPERTOUCH ECLIPSE Adjust Pull Weights of 2½ and 3½ lbs https://www.hiperfire.com/product/hipertouchecl/ BCG: Toolcraft Lightweight .223/5.56 BCG (Bolt Carrier Group) Black Nitride https://ar15discounts.com/products/toolcraft-lightweight-223-5-56-bcg-bolt-carrier-group-black-nitride/ Gas Block: Superlative Arms .750" Adjustable Gas Block, Bleed Off - Clamp On - Melonite Finish https://suparms.com/products/750-adjustable-low-pro-clamp-on-gas-block-melonite-finish Gas Tube: Ballistic Advantage Gas Tube QPQ Coated https://www.opticsplanet.com/ballistic-advantage-gas-tube-qpq-coated.html Charging Handle: Radian Raptor-LT Ambidextrous Charging Handle Assembly AR-15 Aluminum https://www.midwayusa.com/product/1019310582 Muzzle Device: VG6 EPSILON 556 https://www.vg6precision.com/vg6-epsilon-556 The lower receiver has some tiny scratches right under the charging handle (in the pictures). This is because the upper and lower receiver fit so tight together if you do not line it up perfectly the upper will hit the lower receiver when you are putting them together. Since I was adjusting the JP adjustable buffer, and trying out different springs I had to field strip the gun multiple times and that is why the lower got scratched, due to me not taking my time to line it up perfectly and the upper came down on the lower. There is NO WOBBLE, this is the tightest fit between a lower and upper I have ever felt. Once the pins are in there is no movement at all. I have a Holosun Green Dot I can sell with it if you are interested in that as well. It has shake awake and auto brightness and dimming based on the light in the surroundings. https://www.amazon.com/HOLOSUN-Vision-Compatible-Battery-HE403C-GR/dp/B07B4HMMLY 1,800 For Rifle - If you want the Holosun too let me know and I will give you a price