Thursty

Bump for lower price

In. Medium.

Bump

Bump

Bump

Pm’d

Bump

Bump. I'll also throw in a couple speed strips with the .38

I'm tearing the bench down this weekend, last bump if anyone wants it.

Bump. I’ll throw in some 12 gauge wads and a 5 gallon bucket of hulls too.

Bump

Rough Rider sold and price drop on the Charter.

Alright, who ever takes this thing lucked out. I was digging through my junk and found an old 12 gauge loader I kept for parts. Works fine, but its older and not as pretty. You could swap some of the 12 gauge parts to the newer 20 gauge press, or you could load on this one. Either way, $500 gets you a 12 gauge press and a 20 gauge press.

Price drop. $800/$900 with optic.

I’m probably going to disassemble the bench to get it out of my garage this week, if anyone wants it.

Bump. Also, please refrain from making side deals on this post. All trades considered, but in addition to the above, also looking for a .44 magnum or .45-70 lever gun.

Rough rider SPM

Double post.

Also comes with 325 rounds of loaded 20 gauge that you can break apart and use the components, or do whatever you want with.

Bump

Bump

Bump. Everything still available. $400 for both pistols.

Bump

For $600 I’ll throw in a pound of Clays, 5ish pounds of #8 lead shot and the reloading bench. See pictures. Bench is designed to reload in a circuit for maximum efficiency. Other side of the bench is a mirror image set up for 12 gauge. I’m not selling any of my 12 gauge stuff but you could put a 12 gauge press in it’s place or any other pistol/ticker reloading set up. Bench is 8ft x 3ft.

$400 bucks for the whole shebang. mec 20 gauge loader with automatic primer feed and 7/8 oz charge bar with # 22, 23, 26, and 29 powder bushings 3-5k Winchester AA hulls (estimate, see pic) 3-5k wads (estimate see pic) I’ll include tall and short bottles about 300 Federal and CCI 209 primers Also have an older 12 gauge press set up for 1 1/8 oz of shot it is in rougher shape, but it does work you could load on it, or swap the 12 gauge plate over to the nicer 20 gauge press 12 gauge press will come with a 5 gallon bucket of hulls