Erich

The only club close to Chat that has bays I know of is Montlake just outside Soddy. But don't believe they arent 270. They do Their rules seemed a bit more intense for a private club, havent been there. Not sure what their longest range is. I go To Chattanooga Rifle club and their longest standard range is 300yds, 500yds for special events only. No bays, one tactical course special events only. No firing from holster unless its during an event, which is my only real issue there. Great laid back club imo, but not for those that like tactical training.

Works on SKS and VZ58. I don’t have a 74, but I don’t see why it wouldn’t since it’s basically the same concept.

Saying they all come from the same forges therefore have no difference is like saying all Bourbons have no difference since they come from the same corn. You don’t shoot forged blanks Greg hit biggies on components , but would also say assembly and upper tolerances play a sizeable understated part in it. In the case of a kit that comes with an assembled upper as was the ask, even more true. Now if it’s a complete roll your own, that is a different discussion.

FWIW, the receiver set cut is AR10 vs DPMS standard with its straight slant at the rear, DPMS is rounded. Sounds like it may be a hybrid of the two for compatibility

Welcome from the other side of the river

Updated

If you intend to reuse the pin (Sig looks at these as one time use), a punch isn’t the best way to go. It works with basing amount of deformation of the pin. This is what I use for Sig FP pins. Greatly reduces the chance of buggering up the slide and won’t deform the ends, making easier to drive. Generally can’t tell the pin was removed/replaced. If you succeed with the punch, I’d still recommend considering an arbor press. You won’t want to use a hammer for this job ever again. great for controlled staking or hammer jobs that carry higher risk of damage.

I like the Smith’s as well. It’s fair to say it was under represented this time out. I just didn’t pull it together in the short stint I gave it before side lining it. Im sure after some tuning and trigger time the gaps would all close up. I think any meaningful difference would require they all be on as equal footing as possible. These definitely weren’t, and want to stress that. Qualifying / disclaimers may only go so far on explaining that subjective opinion. Good chance some discrepancies end up understated. Like the effect of throwing in a ringer with a race gun trigger

Nice! Ok, sold me. Next time I see one in my travels. I'd normally order online, but with modern S&W wheel guns, I'd only buy one after inspecting in person.

That's a good question, and I have a list of disclaimers for context, lol. They are all pretty different and are more effected by my current level of practice (lacking) over the last year. On the day, short version for performance goes 20C > XDM > 1066 The favorites would be a mash up of things about each really. the 20C and XDM are much closer and almost tie. As much as I love the feel of the Gen 3 S&W's and its great balance with that length slide, I stopped after 3 mags. But that was more me problem than the gun itself. The 20C was a standout performer more from a familiarity standpoint. My last sighting target (switched out trijicons for OEM plastic) will better explain. In general I have 100's of thousands of rounds thru Glocks, when I am not current they hide my lack of practice best. Related to that, that gun has a great 3lb trigger and the factory comp setup works. All my Glocks are C models except for the RTF frame doners. Even though it consistently performs for me, the reason it cant get the nod as THE favorite is that it has the worst ergo fit. I sometimes run an RTF SF frame with that upper which makes it just about right. But wanted to be fair to the XDM as its stock currently. The XDM is bone stock, I wanted to see how it felt on recoil and sort sight picture for any adjustments. Only about 50 rounds thru it, I see lots of potential and it will give my 20C a run for its money when done if not surpass it. Its ergos are better, and though the test target doesnt show it to the degree its capable, it has good accuracy. Its recoil is more noticeable and I was letting it down being focused on the longish sear engagement as I was weighing going with a PRP trigger. The answer to that is yes in the end. With the trigger and gas pedal to make up for the comp, I expect good things to come. The 1066. I got this 3 years ago as a stable mate for my 1006, and this is the first time I shot it. I love the look and feel, as with any Gen 3 smith. The shorter slide balance is perfect. The novaks on it I could not sort out. I had no idea where it was hitting with the first mag. The hold from my 1006 wasnt working and 0 hits on target. It had to be shameful for anyone watching. It wasnt until I was on the end of 3rd mag I got a sense for it. After that I noticed the brass was flying twice as far as the plastic guns and help explain why the recoil felt excessive for its heft. Its 30 year old recoil spring is done or the original owner swapped it for something too light. It needs a heavier recoil spring to slow it down and not beat the frame, on top of me doing my job. So called it quits early for it. As much as I love these for what they are, gen 3's triggers are not great by any stretch. This one is far worse than my 1006. No excuses there, it was all me and need to not bring any plastic fantastic with it. Rather the 1006 next time after new springs and maybe smoothing of the internals. These targets were at 12 yards. Top pic is the Glock. I shoot the stupid plastic cheapo sights that Glock folks malign better than the spendy ones. The gaps are perfect they just make sense to me after countless rounds on them. I think its a good thing. The bottom is the XDM. I changed my grip after I was high and got that mediocre group while feeling the sear, so given I wasnt really trying I think it will tighten up great. Not going to touch the sights for now, still working out my grip on the XDM. The crossed out strikes were from 1066 at that the target the last mag (folks should laugh) rather than hang new ones since they were still 'new' targets. If the Smith police were there, they would have take it from me I think. I wouldn't blame them.

better senses.....pffft Sounds to close to thinking, no thanks, I already have too much money. Funny thing I was thinking as I drove home was, a 4" 610 would be a good add! FWIW, I would go with the 4.5 if you happen to run into one unless s&w does a PC version of their full size M&P10. I usually gravitate to 4" in most plastic guns, but that little bit seems to really work for auto 10's. Less recoil than than the 1066, which was initially a surprise (I am going to add a heavier recoil spring after today). I had a G29, really tried to like it, but never clicked.

Picked up a XDM 10mm a couple weeks ago ran it today with a couple other 10's. It was a good day

if you want a nice mid tier build, Aero has some good combos at various discounts, and will offer more going into the 4th. no tax and free shipping. Sign up for notification until you get want you need. Note that some of the more desirable upper setups can sell quickly.

Welcome from another expat. How about those first couple buys? No roster and that giddy feeling of walking out with it, no waiting period. 4 years later, still awesome! If you ever need affirmation of your choice, buy a new gun Fair warning, the mag replacements seem cheap at a few bucks a piece, but really adds up FAST. I wore the numbers off a couple credit cards inside 3 months. Enjoy!

Yep, exactly what I meant in that last thought. Either maintenance or the Bubba factor. The low price point of the 320, good bet it’s more Bubba.

Ever since the 320 came out it’s been a target based on the known problem of failed drop tests. Even with recall fixes, it wouldn’t be hard to convince the right jury for a shark of an attorney. There is also a precedent with another officer that will help folks queue up for Sig dollars. An officer a couple years prior to this sued Sig claiming the same. Dont recall her name or PD. Sig settling out of court. The buffet is now open. Is it possible? Maybe. Thing is you don’t know what all has been done to them. I have 3 FCU’s with numerous grip modules and slides. Usually have another 320 in my nightstand. Never happened to me.

If you want the best front sure tool for the range, they are on all for &30 plus shipping. https://www.magna-matic-defense.com/akfst-blemished-unit/ If you prefer the beat it with a rock method from the field manual, carry on.

CCR refinished my 1911 with their CPII plating and they did a fantastic job. https://www.ccrrefinishing.com/

It is a compact with 4” side. the full size has a longer grip and you can’t run the x-grip on it like the compact pictured here. that x-grip in the pic is a mag sleeve spacer that allows you to run the full size mag 17 round mags and mimics the full size grip shape at the bottom. OP said 16 round since that is the largest number stamped on the counter, but they hold 17, 15 on the standard compact mags you’d use without the spacer.

Best guess, what do you all think they’ll do? With all the rumblings of a 75 point hike, the action today didn’t suggest increasing concern with moderate selling and a big closing uptick. With that and prior statements, I’m leaning status qou. Not as flexible as was hinted. As much as reactions over the last year have occasionally surprised by moving contrary to the news, should be interesting.

If only I hasn’t reversed my shift patterns all those years ago!

the prior 3 years I spent a bit of the summers in deep south GA taking care of properties that are mostly on partial wetlands. Sand and weaponized biting insects everywhere. higher heat and humidity than here. I appreciate it here much more! I appreciate having 3 AC guys in my phone even more.

That’s great, all these years I never knew that had a fitting designation. unfortunately a lot of CA folks are use to high heat. In the north valley where I was. 30+ days over 100 was not uncommon. Along with several days over 110. humidity was only 40 to 50%, but didn’t seem to make a huge difference on days in the brutal temps. Biggest difference was I only needed 2 dehumidifiers in my safe there. I’m up to 10 now here.

I went with an EMP when I looked at the wee 1911’s. Same size really. the squared msh sticks out with my car mode. They fixed that with the EMP4, but didn’t want to hassle with the Ti firing pin again. You touched on the big thing, how one prefers to carry is the big thing. You must have some crazy big pockets!