cannoncocker

"Should you need to use it, Smith & Wesson customer support is second to none in the industry, and you get a lifetime service warranty."   I agree.  During the past four years, I purchased four brand new S&W Revolvers.  Three were defective out of the box.  They should have never left the factory.  All three were repaired and returned within fifteen days.   During the same period, I purchased two Glock and four CZ pistols.  As I have never needed warranty service, I have no idea how good Glock or CZ customer support really is.   Quite frankly, I don't care where they are made.  I just want them to work out of the box.

  If the control circuit is anything like the 140/150 it may very well be an electrical problem:   LA140/LA150 Function: To provide a safety interlock when the machine is being operated in reverse while the PTO is engaged, by providing a ground path to be used by either the ignition coil to shutoff the engine, or the RIO latch relay to keep the engine running. An operator who deems it necessary, and chooses to keep the PTO engaged while backing up, must take a deliberate action to actuate the RIS switch, by pressing the button momentarily while pressing the reverse pedal.   RIO Operating Conditions: The key switch must be in the run position, engine running, the operator must be on the seat, the PTO engaged, and the RIS switch must be pressed (momentary) while starting operation in reverse.   Theory of Operation: The Reverse Implement Option (RIO) is controlled by a relay and two switches wired in a circuit with the ignition coil. This combination of components provide for control of three different functional situations:   • PTO off with any drive function. • PTO on and operating in reverse without activating the RIO circuit. • PTO on and operating in reverse while activating the RIO circuit cont.....

What model?  I have a service manual for the LA100 series.  Feel free to PM me if you wish.

Here is what is going on in 2015:   http://www.census.gov/2015censustests   I understand Elizabeth Warren has been selected to participate as a "Tribal Leader".

In 2000, after five unanswered mailed requests, the census bureau sent  a census taker to my house.  On his fifth visit he caught me outside my home on my tractor.  I told him I'll pay the $100.00 and to send me a bill.  He left and I never heard another word from the census bureau.   3 U.S. Code § 221 - Refusal or neglect to answer questions; false answers   (a) Whoever, being over eighteen years of age, refuses or willfully neglects, when requested by the Secretary, or by any other authorized officer or employee of the Department of Commerce or bureau or agency thereof acting under the instructions of the Secretary or authorized officer, to answer, to the best of his knowledge, any of the questions on any schedule submitted to him in connection with any census or survey provided for by subchapters I, II, IV, and V of chapter 5 of this title, applying to himself or to the family to which he belongs or is related, or to the farm or farms of which he or his family is the occupant, shall be fined not more than $100.   (b) Whoever, when answering questions described in subsection (a) of this section, and under the conditions or circumstances described in such subsection, willfully gives any answer that is false, shall be fined not more than $500.   (c) Notwithstanding any other provision of this title, no person shall be compelled to disclose information relative to his religious beliefs or to membership in a religious body.

How about boiling hot water and GI (brown) soap fresh out of a garbage can heated with an M-67 immersion heater?  Worked for me just fine in 1959.

I have one for each of three different pistols.  All are well made, a perfect fit for the firearm and as Erik88 said, stays put with a decent belt.

If you own one, how do you like it?  If you got rid one one, why?  I own a few of their steel guns and am looking to go plastic.   Thanks.    

I have a 22/45 5 inch, a 22/45 4 inch TB  and a 22/45 Lite 4 inch TB.  I also own a Browning Buck Mark 5 inch and a Browning Buck Mark with a 4 inch Tac Sol TB.  All have rails and I have shot them without problems from 10 to 50 meters with a MRDS.   The Ruger 22/45 Lite belongs to the wife.  It is too light for me, even with a suppressor.   My recommendation is to buy a Browning Buck Mark 5 inch and a Tac Sol 4 inch Trail-Lite barrel.  It will balance perfectly with a suppressor.  I shoot mine with a Sparrow SS and a Primary Arms Micro Red Dot.   If you ever get to Knoxville, I could wrap your hands around any of the above.

  This URL should run Spot On on your desktop.   http://spoton.nikonsportoptics.com/spoton/spoton.html#:4

My choice would be the 2-7.   The software allows you to pre-determine the range where each mark zeros based on the load and range you are shooting.  I print a range card for each load and distance I want to shoot.  Download the android app and play with it.  You will see what I mean.

I like mine, especially when used with the Nikon Spot On ballistic software.  For the money, it is a darn good scope.

I have a 1955 vintage Stevens 311A .  This model is well known for weak firing pin springs.  Compare the firing pin indentation on the primer of the shell that fired with shell that did not. 

Some good may come out of all this after all.  Maybe the Chinese will provide us with Hillary's email.

Barrel threading was listed in the details   Details RUGER® AMERICAN® RANCH 300 BLACKOUT FDE THREADED BARREL 5/8"x24

I have a Lone Wolf 9mm conversion barrel in my Glock 23 Gen 4.  Over 500 rounds with out any problems whatsoever.  Using the .40 extractor and recoil spring.

I have a set of Crimson Trace LG 305's on my 637.  They look and function just fine.

Loudon County.

I have the single action version. Love it.   Now you need to locate a Kadet conversion kit.

Thanks, didn't realize the post I linked to would be bumped down. Change made.  

Interesting read.   http://blog.princela...ms-law-seminar/

The TICS unit is closed on those days.

Just my name as shown in 3A worked for me.  No title.

These folks can help you get started:   https://familysearch.org/learn/wiki/en/Madison_Tennessee_Family_History_Center