TGO David

Received my Costa Ludus / 21st Century Gunfighter "Catalyst" extended mag release for the Smith and Wesson M&P handguns today... Promptly installed it in my M&P 9mm and can say that despite being a just small light piece of plastic, it's almost worth the $30 it cost shipped to my door. The price is indeed a damn bit absurd but it's also the only extended mag release for the M&P and there are also only two vendors selling it on the Internet right now from what I've seen, so they can pretty much charge whatever they want for it and if you want one, you'll pay it. So what's it look like installed? I have read questions on other forums asking if it interferes with the use of Raven Concealment Phantom holsters or Comp-Tac MTAC holsters. I carry with both and the holster's trigger guard stops short of the mag release area so, no - it does not interfere and use of those holsters does not cause the mag to eject by accident. I also tried it with my TT Gunleather and my Occidental Leather Company holsters and it worked just fine with them for the same reason. Overall I am very pleased. The extended release allows me to drop the mag without breaking my primary hold on the firearm. I have short little Shrek fingers anyway, so this is a huge improvement for me. It's very similar to the Vickers Tactical extended release for the Glock series and I love that on my Glock 19, so... this is a winner. I'd like to buy about three more of these for our other M&Ps but that'd be nearly $100 in plastic and I'm not about to do it. I may pick up one a month for the next few months, but the price seriously is out of line and out of reach of most people I'm afraid. Which is a shame because it is truly a damn good upgrade.

They should focus their energy on practicing propper trigger pulling technique with shotguns in their own mouths. A "respectful proximity" to the ceremony would be them, burning in hell.

I'm surprised this thread still has legs like this on a gun forum. Surely there are cycling forums out there. Are they just all tired of talking about it?

I'll be visiting you guys soon for our second XD-S.

Sipping some Four Roses Single Barrel right now actually. I've been keeping a fifth of it around for about two years or so now. Good stuff.

Welcome to TGO!

Technically it should be back to the start of things but I know that's not true based on some of my own searches. One day soon I'll need to take the site down for a day to do some maintenance, one item of which will definitely be re-indexing the search database.

Disagree with Dave that the M&P 45 is that much fatter than a 1911 grip that it makes it unsuitable as a "carry gun". The M&P 45 grip is only a hair thicker than the M&P 9mm or .40SW variants and the slide is likewise only a hair thicker. The difference is so negligible that the vast majority of holsters made for the 9/40 fit the 45 perfectly. I know you're talking about the 45C but I'd skip that and go straight for the shorter (4-inch) full size instead. The M&P 45 4-inch version is the perfect carry .45ACP in my opinion. Here is a very good photographic comparison between the M&P 45 4-inch and a 1911 Commander size. These are not my photos but they save me the trouble of having to break out the camera and do the same thing.

I dunno... I wear pants that fit correctly, a good sturdy gun belt all the time, and am just used to it I guess.

Thanks, I shot him an email as well.

I couldn't tell you. It's been at least 5 years since I did it and I have no idea what it cost and don't have my email from back then.

I had a Kimber once in the past that had the KimPro stainless satin finish. The frame itself may indeed be stainless steel but that is most certainly a top-coat. Rub it down with some acetone and you'll likely see the cloth come away silver. Actually don't do that... I'm just making a point. Seriously, you will not be disappointed with Robar's NP3 finish. It may take them a few weeks to get your stuff back to you but it will be worth it in spades.

I replied to the email last week. Check your spam filter.

Before you send it back to Kimber, I'd consider just having the firearm coated with Robar's NP3 or NP3 Plus [link] and ask them about having their smiths fill in the scratches before they do the coating process. I had an XD-9mm that I had treated with NP3 and that was one bad-ass finish. You won't find a paint-on finish anywhere that does with NP3 does, or holds up like NP3 holds up, IMO.

Yeah I really dig that. Do you have his contact info? I didn't see it readily available on the Smith & Wesson forum and really don't want to sign up for yet another forum if I don't have to. I already get about 300 emails on my birthday when all of the forums I'm a member of bombard me.

I've got a Comp-Tac MTAC coming for it so that my wife can try it as an IWB carry. I'm searching for a holster similar to the RCS Phantom to order for them as well but so far RCS doesn't make one and I've not really covered too many other bases yet.

Welcome back, congrats on the gun and you're right -- it doesn't matter where you work you're always going to have to put up with politics and BS to tolerate.

Regarding my grandfather's 1911in the first post, after some more research [link] it appears that this 1911 is not a Gold Cup but rather one of the original National Match run produced between 1932 and 1940 per the serial number on the slide. Amazing.

These two mean more to me than anything else I own. I inherited the Smith & Wesson Model 19 Combat Magnum from my dad when he passed away two weeks ago. He inherited it from my grandfather. My grandfather was a career law enforcement / Federal security officer. The Combat Magnum may very well have ridden on his hip and ensured that he made it home to his family every night. Sadly neither he or my dad are around any more to ask. The Colt 1911 National Match was my grandfather's and he competed with it successfully for a number of years while working as the head of security for one of the Department of Energy's nuclear facilities. The National Match was in absolutely horrible shape when it was handed off to me after my dad died. It was in pieces and the barrel and barrel bushing were completely rusted together, and the firearm was just generally neglected. I soaked the pieces in a gallon freezer bag full of CLP for two weeks and then gently scrubbed on them with a brass brush and some 0000 steel wool until the rust was gone. After careful cleaning and reassembly of the remaining pieces, it now cycles and appears to function properly although I may have it gone through by a competent 1911 smith sometime soon just for safety's sake. After that, it will once again return to rust-prevention bag and be left in the safe. After some more research [link] it appears that this 1911 is not a Gold Cup but rather one of the original National Match run produced between 1932 and 1940 per the serial number on the slide. Amazing. Both of these are family heirlooms and represent two generations of my forefathers. One day my son might own these and I hope when the day comes his son might as well, and so forth. To say that they are invaluable to me would be an understatement. What do you have that's been in your family for a while?

I wouldn't worry a bit about someone else's design and using it for your own purposes. Even still if their design isn't patented, and most aren't unless they have some unique feature or quirk, then it's fair game if you wanted to sell them.

I wear 5.11 pants and shorts all the time and the pockets are designed to accommodate small firearms like this. It's all in how you dress.

A lot thinner. It's literally about the same size as the Kahr PM9 albeit a hair taller in the grip.

$579 pus tax and TICS. I've been seeing them for about $20 more than that locally.

Check with David (DLM37015) here on the forum. He is a TGO Vendor and may have some 45ACP on hand or may be able to lay his hands on it for you. Also check with Outpost Armory locally as I saw they had a mountain of 45ACP in 1,000rd cases just the other day.

I like that pattern a lot. Does he have them in the FDE plastic as well?