patrick28

I don't have a safe in my garage, I have a reloading room for it, I have gone the route of using a secured room with a security door and heavy duty locks ad a safe room. Now my garage I never open it, it's humidity is controlled set up a unit, attached a hose and feed it under the crack under the garage door. Works awesome My garage stays locked I also don't have one of those secondary exits ex. A door off the garage, My 2 cents

I think the magpul mags are pretty nice, not sure how long they hold up long term wise. My favorite one is this Chinese flat back mag. The last ak i owned was a zastava m92 pap and it was awesome think I paid 385$ for it a few yrs ago You won't find them under 500$ now

I had threw a bid out on that when I seen it had a min left, this was right after I bought my beryl archer, so I didn't have time to research anything. I was aware of the Russian folding stock it's like a polymer one, as well as the triangle folder. I got excited when I saw that notch for a stamped trunnion.

The kit furniture is remarkably nice minus the stock which I find less practical to actually use shooting wise. I did find a polish beryl stock that's an ace type stock which might work best for me

I think I ended up with a European fixed stock version, but I'm not sure since its a take off part from an ak, maybe the guy im getting it from isn't being honest.

Please convince me not to buy a russian molot 40 rnd mag here btw http://jesticearms.com/index.php?route=product/category&path=20w, Halfway down 32.50$

How can you tell what mags are bolt hold open & what are not? It's all about the follower?

Hard decision though I can get the stock I want most of all nitrided for no extra expense I might nitride it instead

I like the storage for the bottle of frog lube you can fit in the + moe

Me 2

Couple of questions Currently has dark mohogany color wood furniture All the numbers match Need help deciding a few parts Pistol grip- Magpul moe + grip Wooden bulgarian needs a little tlc Or the cheap plastic kind that came original Stock- West german wire stock Original wood stock with sling loop needs tlc and the cheek-to-stock sucks Beryl folding ace stock with sling loop, im leaning towards this for it's better cheek-to stock feature. Or a Russian triangle fixed stock Trigger will be a tuned tapco Barrel is a new American chrome lined barrel, already assembled. Sights seem to be very nice so I'll probably keep them original. Brake-slant cut original Mags- Magpul pmags Chinese flat back Non flat back mags Any input on what is the best choice I should make? Im intending on enjoying this so it's not just sitting in the safe, It's getting a nitride coating too. The rifle is in great shape in my opinion Thanks

I'm hoping the guy gets caught, cuz I know I'm not the only victim.

The $ is replaceable luckily it happened in cyberspace for the perps health, lemme say it's super inconvenient that's all.

That's what I do "oh shoot", actually I never use my debit card The one time I need cash out the atm that happens, I always use PayPal & or credit cards I use my debit card once a month maybe 2 times. They cleaned me out until the bank stopped them only got away with 600$ but left me in the negative 600$ since I had several payments going out. The guy is lucky he didn't rob me in person, he'd be taking a dirt nap.

Just found out I was a victim of a debit card skimmer. They got 600$ before my card shut off, Heads up if you used the atm at the usaa bank off ft. Campbell blvd. The skimmer unloads funds in Nashville The atm I used was the drive thru one I never use my atm card and only did while my family was out yardsale hunting last Sunday, this is how I know where they hit.

I think the serbian zastava pap line are fantastic ak's. And priced well around 5-600$

Following this maybe interested

Been looking at that case builder program 67$ for the foam cut out not bad

I always put a heavy buffer in a rly short ar pistol, but if it's going fpr precision type rifle Id use an adjustable gas block amd a milspec buffer, thats all you need to notice a difference

Those screws that are on the front of the mount is that to make the sight level? The 2 short ones in the front corners of the rmr mount?

Look at a recoil gunworks 16" socom nitride 556 barrel they are faxon barrels and good price, no need for a 500$ barrel, save urself 350$ look em up

http://www.expansion-industries.com/product-p/mb50425.htm Here's the one I got

Bought my 2nd shotgun of my life my previous was a mossberg m5901 I believe, sold it yrs ago and rly took it on a trade it was nice had a stainless look with black furniture and a folder stock. Anyway I just bought a new mossberg 500 12g 5+1 18.5" barrel non slug smooth, It's cercoted in magpul fde with multi cam furniture looks rly nice Well im looking for 2 things A-best things to buy for it, I like doing my own smitty work it will be my first time working on a shotgun. My level of knowledge on this gun is basic I can do an assembly & disassembly, and know proper function. B-how to install these items or at least any tips or tricks to getting by with general smith tools unless absolutely necessary. Things I want to do with the gun -not ruin the finish -side saddle -a good set of sights it currently can support a rail & has a lil gold bead front sight. Maybe night sights? -the front sight which type is easily installed? Seen a clamp type that fits on the barrel, a screw in type that looks like it may require a bit more work to fit, and a dove tail type the latter is probably out of my knowledge ability & tools on hand. -top mounted rail, I have an Trijicon rm09 and a colt co-witness sight in matching fde that might be fun to try out, if so does anyone have one on a 12g? Does it handle the recoil? -not interested in furniture -perhaps a more ridgid safety switch although the one on it isn't broke so probably least of my needs. -is there a rail mounted rear sight? And what is up with the dowel inside the magazine ? For hunting? Also lastly any ability to extend the magazine to 8+1 and have it be the matching fde color? Thanks Main purpose is home defense, and like to try out a 3 gun match so... needed a 3rd gun.

I think I'll buy a solid foam piece amd have someone artist use the hot wire on it for me.

It was snowing pick n pluck at my residence a few minutes ago, I shamefully vacuumed up my tantrum and now I feel slightly dumb for not having it professionally cut, aswell as having just begged the manufacturer to let me have a do over..