Sunfish

If you have Large Pistol primers, I'll trade you a few. Message me if you're interested. I'm local

I have a few I would trade for Large Pistol Primers

I could really use these primers but it's around 200 miles over there and 200 back. If any established member is coming through there message me and I will make it worth your while to bring the primers back to Middle TN. I have no experience with N320 but I'm sure it's good pistol powder

Dammit is mighty rite. Let them have plenty of line before you set the hook

Pretty sure every Locker in the mid-state area is full to capacity. If someone knows one that has some room message me.

Good luck to everyone today. Keep safe

What have you got to trade for some? Message me

Today is your day.

Ask that lady down at the end of the hall she'll let you have a little sheet

Thats a whole lot of gun for the money. If it was in a caliber I already owned it would be mine. GLWS

The brain-dead thing shows up every 4 years because it's burnt into their hard drive

What you got to trade ?

Rob, you'll need some good plastic tape and follow the instructions about the release agent. I can't help you with the pillar part because I don't use them.

It's not a one-shot deal. You can grind it down and add to it.

You can do it. Buy one of those acra-glass kits from Brownell's. I would only bed the action and free float the barrel. I have one rifle that I full contact bedded and it shoots great but it's quite a bit more work. Be sure to follow the instructions about the release agent. You will need to knock it apart with a rawhide hammer to get it apart

Mine are RCBS FL Dies. There are other brands available, but they get the job done. The 9.3 x57 is the hard one the only thing out there is Hornady and they are really hard to come by. Good luck and don't worry about it being ugly because pretty is what pretty does

Rob the data in my notes with the 270 gr. Speer was for the 9.3x57 the data I have for the 9.3x62 was with a 286 gr. The Western Powder BIG GAME is the best of all that I tried, and I tried 4350, 2520, 4064, 4895 and RL 15. I started at 45.5 and went to 47 with no signs of over pressure but it works the best where I started. The groups began to open up a little as I increased the charge. My gun has a long throat so be very careful with that new three groove until you see how it's going to act. Quite a few people think that the 9.3x62 is the GOAT medium bore. My rifle is pretty light and about 4 or 5 shots will get your attention. Have you bought any dies yet?

Both, The S&B is great and Prvi is good. Speer makes a hot core 270 grain spitzer that is a fine bullet if you can find them. I'll look in my notebook and get back to you on charge weights and propellants

Dude jumped the wrong display case

There are quite a few Husqvarna's around and CZ chambered them for a time. I also own a 9.3 x 57. Both of mine are 98 actions but some are the Swede 46 that are cock on close actions. The 9.3 x 57 is a fine woods cartridge where the 62 is more of an open country round. The huskys have the correct drop on the stock for open sight shooting and when I asked why I was told they drive game in groups and most of the shooting is at running moose. You shouldn't have any trouble killing anything in North America with a 9.3 x 62

Thank You

I have had one for some time. They shoot 286 gr mostly. They are slightly ahead of a 35 Whelen. It would kill a cape Buffalo with a solid just make sure you're in a very large tree when you shoot him.

You have to know where something is before you can come and get it. I can't remember much after about a month ago

I agree with the 2400. If you compare it with 357 Magnum and don't try to load it to hot, you will accomplish your mission. I promise you will know when it goes off.

Message sent