Jump to content

ken_mays

Active Member
  • Posts

    397
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by ken_mays

  1. Brownell's is the only place I know still offering a C&R discount... but discounted Brownell's prices = regular retail prices everywhere else. I have a C&R still but I probably wouldn't miss it if I let it lapse. I don't have much interest in C&Rs anymore and (aside from mail order), I've only ever had one regular FFL know what a C&R FFL was and sell to me.
  2. No, I haven't handled the M or MRD, just the original 509. Encouraging to see that they are addressing even minor complaints about the frames, although there really isn't much to complain about, it's one of the more ergonomic ones out there. I still think the sear is flimsy compared to other designs and I think the Apex one would be a worthwhile upgrade (again, haven't seen the M or MRD). I am actually a fan of the factory trigger design though I know many people seem to prefer the straight Apex unit. However, even after shooting several thousand rounds though mine and doing some polishing, it still registers 6 pounds on the trigger scale. It's not as squeaky and gritty on take up as a couple of the FNSs I've owned, but I wouldn't call it smooth as an M&P or Glock either. I tend to reload every caliber I shoot, except for shotguns and .22. When I could load 9mm lead for $.06 a round it made more sense than it does now, but I still do so because I like a consistent load that I know makes minor power factor for competition. I also like to load fairly long (though nothing approaching SAAMI OAL limits) because long rounds run better in 1911s and I prefer to have one load that runs reliably in anything. Only Glocks and the 509 ever had a throat short enough to be a problem, but since there seem to be some subtle differences with the later 509 variants, maybe that was addressed as well.
  3. The only thing I'll send out for is plating or PVD / IonBond. Usually I don't even bother, I'll do Cerakote or hot blue.
  4. I've handled one and got a chance to look at it with the slide off. The internals didn't inspire a lot of confidence. The rails were relatively flimsy sheet metal that were floating and not firmly molded into the frame, and some of the fire control assembly parts appeared fragile and not up to much use and abuse. There was nothing off-putting about handling and dry-firing. It is pretty acceptable all the way around. Trigger was around 5 pounds. About the only exceptional feature here is the optic mounting system, at this price point. I'm not saying I won't buy one, but I want to wait until some longer-term reviews start to trickle in, and I will wait until I can pick one up more cheaply than I've seen it so far ($470).
  5. As an owner of the 509 (non electronic sight model) and quite a few FNSs, what really chaps my hide is the trigger on these. They all tend to have a squeaky, gritty, jerky pull with plenty of hitches in the creep. Much of this is due to rough machining in the striker channel. I had the opportunity to shoot one of Dave Sevigny's competition FNSs and that trigger was slicked and lightened far beyond anything I've dared to do on mine. He said that polishing and striker spring trimming was how he managed it. Reliability wise, I think the fire control components are the weak spot here, especially the thin, narrow sheet metal sear which is more susceptible to deformation than it should be. I discovered this when I had a FNS that developed a dead trigger after a few hundred rounds. The sear was not always catching the striker, due to slop in the frame/slide fit. It was easy to bend the sear up at more of an angle to catch the striker every time. It is also immensely irritating that the FNS and 509 magazines are different, at least the floorplate. The tubes are the same but any advantage in interchangeability is lost once you have to fiddle-fart around with the floorplates. Another thing I don't care for on the 509 is the contouring of the frame around the mag release button. In their quest to shield it from accidental activation, they made it more difficult to find the darn thing with your finger or thumb. If I carried mine, I would have to grind down the plastic bumps surrounding it. They also have a really short barrel throat as well. I was shooting some reloads that had no trouble chambering in a lot of other pistols I happened to have that day, but the 509 wouldn't even go into battery on them. I believe the barrel is nitrided, which rules out reaming with a standard HSS finish reamer. Other than these gripes, I like the 509 and find it reliable and accurate. I especially like the sights. It's an easy gun to shoot accurately and would be even more so if the trigger had a cleaner break.
  6. I use Titegroup for 9mm, 40 and 45, among others. It's fairly fast-burning and well-behaved. In my experience, almost anything will work well in .45. When I use medium-rate powder such as AA#5, the cases, especially in 9mm, are filled up more and tend to slop powder out as the shellplate rotates.
  7. I always liked the LA Police Gear operator pants. I think every pair I bought has been sub-$30.
  8. I suspect your powder has deteriorated. I would buy a pound of something new and try again.
  9. In my experience, adjustable sights are more necessary on 9mm 1911s than .45s. Regulating point of impact for a 9mm is often not ideal out of the box on fixed sight 1911s and you will more often than not have it shooting low or high.
  10. That's the old Range 8 facility on Lamar. I haven't been in there in 20 years. I figured it was no longer a public range, and I think they close up around dark (not a bad idea, in that part of town).
  11. Oh, I absolutely agree. But on the 442s, they are such a dull matte blue that they might as well be painted. I did recently come into an older S&W Airweight that I think would be a sin to paint, though.
  12. The PCC is far more reliable out of the box than most 9mm ARs, especially the parts / budget versions. I remember reaming about 7 or 8 short-chambered barrels for owners of PSA AR-9s after the owners saw crumpled loaded cartridges coming out of the chamber. Then there's the issue of finding a buffer system that you can live with that won't beat your trigger to death. One fellow I shoot with has been through about 3 broken Hiperfire triggers with his AR-9. The PCC can also handle very light 9mm loads, which is useful if you're doing steel matches with it. I got down to about 2.4 grains of Titegroup behind a 115 gr bullet before it wouldn't cycle reliably. It isn't often I get really enthused about a new rifle but Ruger did so many things right with this gun that I am a huge fan of them. Now the Mini-14 is still an expensive, inaccurate turd when you put it against a $400 AR.
  13. You might want to consider a 5" 9mm 1911 with an aluminum frame. The lighter frame counteracts the added weight from the full length slide, while the long slide carries better (for me, at least) than the Commander size and the sight radius makes it easier to make accurate shots.
  14. Wilson just announced a longer slide version of the EDC X9. https://www.wilsoncombat.com/edc-x9l/ That's what I was waiting for, since I didn't have much use for a carry-sized version. I'd prefer something I could compete with.
  15. I have a 442 with a blued barrel and cylinder and I would rather have a cheesy coat of paint, honestly. It's a fair amount of work to keep rust off the blued parts on the 442 when I carry it.
  16. ken_mays

    Kimber EVO

    There are several companies I trust to introduce a new design. Glock, HK, Beretta, for instance. Kimber is definitely not one of them. I adopt an ironclad "let's wait a few years and see" policy with them.
  17. With the TWRA range and Point Blank squeezing them on both sides, it was just a matter of time. I know a group of folks who quit going to RUSA when they refused to maintain / upgrade their ventilation system. These folks were showing up at the doctor with their blood lead levels well above safe limits and they spent a lot of time shooting there. On the weekends, there was a big waiting list to use the range because they always seemed to have one side or the other "out of service". I would go into RUSA from time to time to browse their consignment sales, but those started petering off a couple years ago. I've bought some guns out of their consignment cases in the past but they were never competitive enough on new gun sales. I'm sure Point Blank put an end to that part of their business. Point Blank is a very respectable gun shop in addition to being a clean, modern indoor range with excellent ventilation. A downside is that they won't allow work from a holster. I will miss the RUSA cafe, though.
  18. Generally I perform the Burwell DIY sear modification on my M&Ps. Usually, that's all that's necessary to get the trigger to a point I can live with. www.burwellguns.com/M&Ptriggerjob1.htm
  19. ATF won't issue a license unless you are in compliance with local zoning codes and such. If you can't get a business license where you are, you probably can't get an FFL either (C&R 03 FFL excluded).
  20. True, but knowing is half the battle. I'd rather know it's happening immediately rather than 8 hours later. And you can also buy a remote control water valve too, I believe.
  21. You can buy water alarms that are wireless enabled and can send you an email or text if they detect water. I'm looking into that for my own water heater.
  22. I received my gauge and my bolt checked out OK. S&W will send you a bolt gauge for free, but you can make one out of a piece of metal .035" thick or use a small feeler gauge. If the gauge sits flush to the bolt face, you're good. If it sits proud of the bolt face, it needs to go back.
  23. I never jumped into the piston AR parade because 1) the design is necessarily proprietary, 2) if I wanted something different, it was not going to be an AR, and 3) the potential performance increase just wasn't there. Nothing against pistons per se, but in the AR it never lit my fire.
  24. Most of my ARs will do around 1.5 MOA with halfway decent (M193) ammo, provided a good trigger, good scope and a bench. My 6.5 Grendel will do that with Wolf steel cased ammo, and well under 1 MOA with decent (e.g. Hornady) loads. That's good enough for me, since I no longer bother to load 5.56 for maximum accuracy. Most of my ARs are kind of like AKs, I tend to shoot the cheapest crap I can get away with.
  25. I hate to hear that, though I wish I could say I was surprised. The best performing Taurus designs I've heard are the PT92 and the PT111 G2. As to the shipping cost, about 10-15 years ago the carriers implemented a policy that handguns must go next day air, thus the premium cost. FFLs can still use USPS to ship handguns more reasonably, but A) it's only for FFL-to-FFL and B ) It's USPS

TRADING POST NOTICE

Before engaging in any transaction of goods or services on TGO, all parties involved must know and follow the local, state and Federal laws regarding those transactions.

TGO makes no claims, guarantees or assurances regarding any such transactions.

THE FINE PRINT

Tennessee Gun Owners (TNGunOwners.com) is the premier Community and Discussion Forum for gun owners, firearm enthusiasts, sportsmen and Second Amendment proponents in the state of Tennessee and surrounding region.

TNGunOwners.com (TGO) is a presentation of Enthusiast Productions. The TGO state flag logo and the TGO tri-hole "icon" logo are trademarks of Tennessee Gun Owners. The TGO logos and all content presented on this site may not be reproduced in any form without express written permission. The opinions expressed on TGO are those of their authors and do not necessarily reflect those of the site's owners or staff.

TNGunOwners.com (TGO) is not a lobbying organization and has no affiliation with any lobbying organizations.  Beware of scammers using the Tennessee Gun Owners name, purporting to be Pro-2A lobbying organizations!

×
×
  • Create New...

Important Information

By using this site, you agree to the following.
Terms of Use | Privacy Policy | Guidelines
 
We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.